Xinysun Instrument (Shanghai) Co., Ltd.

Solutions

Breadcrumb: Home > Solutions > Fluorescent Inspection

LUYOR UV Inspection Light - Hydrocarbon Detection

Updated:2026-11-16Views:

Inside an oxygen vessel and in the pipework connected to it, even a very small amount of hydrocarbon contamination - oil or grease - can start an explosion with catastrophic results. This article explains why such residue is hard to find in a routine check, how UV fluorescence at 365 nm makes an oil film visible, and what matters when it comes to beam angle, dark conditions and reading the result. It closes with a practical point: how to add a UV check to the post-cleaning confirmation step in oxygen-clean work.

In an oxygen vessel and in the pipework connected to it, even a trace of hydrocarbon contamination (oil or grease) can cause an explosion, with catastrophic results.

Most hydrocarbons fluoresce naturally under UV black light, which is why this inspection is essential for every manufacturer of oxygen vessels and complete process plants.

LUYOR supplies a range of UV inspection lamps for fluorescence work. Which unit suits a given job depends on the process; the selection points are:

  • UV wavelength (365 nm is commonly used for fluorescence inspection)

  • Minimum UV irradiance (set by the work standard or by the ambient light level)

  • Inspection area (UV exposure needs to be confined to the work area)

LUYOR UV Inspection Light - Hydrocarbon Detection(图1)

Hydrocarbon detection by LUYOR UV inspection lamps

Even trace amounts of hydrocarbon contamination (oil or grease) inside an oxygen vessel or connecting pipework may trigger an explosion with catastrophic consequences.

Most hydrocarbons naturally fluoresce under UV blacklight illumination. Hence, this inspection process is indispensable for all manufacturers of oxygen vessels and process plants.

LUYOR supplies a comprehensive range of UV blacklights for fluorescent inspection. Your equipment selection criteria shall be defined in accordance with your specific process requirements:

  • UV wavelength (365 nm is commonly used for fluorescent inspection)

  • Minimum UV irradiance levels (specified by work standards or ambient light intensity)

  • Inspection area (UV exposure shall be confined to the working zone)


  • Official WeChat QR code

    Email: info@xinysun.com

  • Tel: 131-2093-6518

  • Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai

Official WeChat QR code Follow

Official WeChat QR code

Contact

131-2093-6518

Top