Xinysun Instrument (Shanghai) Co., Ltd.

Applications

Breadcrumb: Home > Applications > Semiconductor Cleanroom

Semiconductor Cleanroom

For semiconductor manufacturing and cleanrooms: particle contamination inspection on wafer carriers and FOUP inner walls, residue recheck after tool maintenance, and particle assessment on cleanroom surfaces and carrier inner walls, using both UV fluorescence and white-light surface inspection, with cleanliness classes and interpretation limits explained.

  • 18 Questions About Surface Inspection Li

    2026-10-31 Defect visibility depends on beam angle and spot uniformity, not raw brightness. Eighteen answers cover spectrum, scratch contrast, workstation and acceptance.
  • Particle Detection Light Application: LU

    2026-10-26 Air data can pass while surfaces are not clean. How a 365 nm particle inspection lamp covers tool PM, FOUP walls and post-move-in checks at 9000 uW/cm2.
  • How to Choose a Particle Detection Light

    2026-10-26 A particulate detection lamp finds surface contamination; it does not count particles. UV shows organic residue, grazing light shows silicon and metal dust.
  • How to Choose a Surface Inspection Light

    2026-10-25 Cleanroom surface checks depend on band, form factor and technique: grazing for particles, normal for fingerprints, oblique for scratches on wafers.
  • Semiconductor Particle Detection Feature

    2026-10-23 Air counts can pass while particles reach the product by settling and contact. Match lamp spot size and intensity, then run a five-step entry-to-close routine.
  • How to Detect Particle Contamination Ins

    2026-10-23 Four contamination routes on FOUP and cassette inner walls, plus a seven-step inspection using grazing light and 365 nm fluorescence in minutes.
  • LUYOR-365L Large-Area UV Flashlight: A P

    2026-10-22 Silicone oil, flux and fingerprints show up as yellow-green patches under a 365 nm flashlight, and a fixed 38 cm scan fits the line pace.
  • Surface Cleanliness Before Coating: How

    2026-10-20 Yellow-green light reveals mold release, fibers and handprints that white light hides. Two angles, G/W/Y light colors, six steps and limits at 40 cm.

Further Reading

· Overview and Methods: Semiconductor Particle Detection: Methods, Equipment and Reinspection Solutions

· Standards and Compliance: Overview: ISO 14644-1 class certificates and the on-site judgment 'our surface is clean' are often treated as synonyms. This article separates the two systems: air cleanliness measures the concentration of airborne particles, with rules for sampling locations and particle-size bins; surface cleanliness is a point-by-point fact, expressed as particles/cm2 or a fluorescence criterion. Why the two cannot be converted into each other, and how to keep each data set in its proper place on site.

· Field Applications and Case Studies: How to Detect Particle Contamination on Wafer Carriers and FOUP Interior Walls, Particle Detection Light Application: LUYOR-BBMA for Tool Reinspection in Cleanrooms and Particle Checks on Carrier Interior Walls, How to Check for Residual Particles After Cleaning Semiconductor Equipment: LUYOR-3103D Fluorescence Inspection Light Application

Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447

SiteMap

Official WeChat QR code

WeChat QR
Official WeChat QR code Follow

Official WeChat QR code

Contact

131-2093-6518

Top