Xinysun Instrument (Shanghai) Co., Ltd.

Solutions

Breadcrumb: Home > Solutions > Fluorescent Inspection

Fluorescent Inspection

The technical layer of fluorescent inspection: UV-A wavelength and intensity selection, ASTM E3022 and GB/T 5097 compliance, periodic radiometer checks, and common misjudgments and rework causes in fluorescent penetrant inspection, degreasing acceptance, optical glass and coating surface inspection.

  • UV NDT Explained: Fluorescent Penetrant

    2026-11-16 PT or MT, 1000 uW/cm2 at 38 cm, the ASTM E3022 lamp criteria and a radiometer on a calibration cycle: how to set up 365 nm fluorescent inspection.
  • UV-A Fluorescent Inspection in Oil and G

    2026-11-16 Fluorescent crack detection on pipelines and vessels depends on 1000 uW/cm2 at 38 cm, low visible light and a radiometer checked on a fixed cycle.
  • Four Uses of the LELMS-38L in Optical Gl

    2026-10-31 365, 302 and 254 nm answer three different glass questions: coating cleanliness, mid-wave blocking and internal scattering. One housing covers all.
  • 6 Questions on Inspection Lamp Standard

    2026-10-31 Inspection lamp audits turn on paperwork: E3022 type and unit reports, traceable calibrations, visible-light leakage in lux, and CE or SONCAP for export.
  • 10 Questions and Answers About Inspectio

    2026-10-31 Ten questions on UV-A inspection lamps: why 365 nm, what 1000 uW/cm2 at 38 cm means, white light limits, spot versus flood beam and IP protection.
  • How to Choose a UV Radiometer: Principle

    2026-10-28 Lamp brightness is not evidence, since bulbs age and filters degrade invisibly. Separate irradiance, illuminance and dose, then set range and verify lamps.
  • How to Choose a UV Flashlight? Telling R

    2026-10-26 UV-A is invisible, so a flashlight cannot be judged by eye. Four checks cover waveband, white light leakage, irradiance and housing protection.
  • How to Use a UV Inspection Lamp Correctl

    2026-10-26 A UV lamp excites fluorescence rather than revealing dirt, so rule out silicone oil and PFPE before inspection. Fix distance and compare known samples.

Further Reading

· Selection and Brands: How to Choose a UV Light Meter: Principles, Units, a Three-Model Comparison and Periodic Verification Methods

· Standards and Compliance: LUYOR-BB Large-Area LED UV Inspection Lamps: ASTM E3022-26 Compliance and Station Configuration

· Operation and Interpretation: 365nm or 385nm? Wavelength Selection for UV Anti-Counterfeiting Inspection and the LUYOR-906UV Application, In Fluorescent Penetrant Inspection, the Blacklight Covers Step Five: Using the LUYOR-3103/3103D for Penetrant Flaw Detection

Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447

SiteMap

Official WeChat QR code

WeChat QR
Official WeChat QR code Follow

Official WeChat QR code

Contact

131-2093-6518

Top