The solutions section has three lines by inspection scenario: biofilm detection (microbial film fluorescence screening in food/beverage, pharma and cleanrooms), fluorescent inspection (UV-A lamp selection, intensity calibration and ASTM E3022 compliance), and speed measurement (non-contact measurement with laser tachometer sensors and stroboscopes). Enter the sub-category for your scenario.
Xenon Stroboscope or LED Stroboscope? Fl
2026-10-21 Flash duration decides brightness and sharpness, and reading speed needs a different setting from defect inspection. Compares xenon discharge with LED control.5 Common Mistakes in UV-A Fluorescent In
2026-10-20 Five recurring UV-A inspection mistakes: no pre-shift irradiance check, assumed runtime, non-compliant lamps, ignored IP rating and a lapsed calibration log.How to Choose a UV-A Lamp for Aerospace
2026-10-19 Four standards behind aviation UV-A inspection lamps, why LED replaced mercury lamps, and a procurement checklist by workstation type and range.ASTM E3022-26 FAQs: 12 Common Questions
2026-10-18 Scope limited to UV-A LED lamps, revisions against E3022-15, type and unit test reports, misleading compliance claims and radiometer requirements.How to Read Stroboscope Speed Accurately
2026-10-18 Tune down from a high flash rate to the first single image, then halve the rate to rule out subharmonics. Two preconditions and a worked 1447 r/min example.Why Is a Stroboscope Indispensable for P
2026-10-18 How a stroboscope freezes a belt, gear or web on a running machine, and why laser pattern tracking holds the image when line speed varies.ASTM E3022-26 In-Depth Analysis: UV-A LE
2026-10-18 Type test versus unit test, the 370 nm peak limit and 1000 uW/cm2 at 127 mm, plus why a 12.7 mm probe and ISO 17025 calibration decide the audit.What Is Oil-Free Degreasing (OC)? Treatm
2026-10-17 The OC note on a drawing sets a delivery state, not a cleaning recipe. Four degreasing methods, three chemical families and the UV check at acceptance.
Email: info@xinysun.com
Tel: 131-2093-6518
Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai
Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447
