The solutions section has three lines by inspection scenario: biofilm detection (microbial film fluorescence screening in food/beverage, pharma and cleanrooms), fluorescent inspection (UV-A lamp selection, intensity calibration and ASTM E3022 compliance), and speed measurement (non-contact measurement with laser tachometer sensors and stroboscopes). Enter the sub-category for your scenario.
How to Choose a Laser Tachometer Sensor?
2026-10-26 Pick laser or LED by distance, set range and offset angle, then wire 5V TTL or PNP into a PLC. ROLS-5PW figures, reflective tape and mounting rules.How to Choose a Stroboscope? LED vs. Xen
2026-10-25 Flash duration, frequency range and trigger mode decide whether you see a crisp frame or a blur. Four LUYOR-906 models compared, 60-300,000 flashes/min.Viable Bacteria in Wastewater Biofilm: P
2026-10-25 Dead bacteria still carry amplifiable DNA, so total-DNA qPCR overcounts. PMA at 4 uM with 5 minutes of blue light masks dead cells before qPCR and metagenomics.365nm or 385nm? Choosing the UV Waveleng
2026-10-24 Security inks differ in excitation: surface marks read at 365 nm, marks under white ink or film need 385 nm, and a UV stroboscope freezes the web.LUYOR-BB Large-Area LED UV Lamp: ASTM E3
2026-10-22 A 280 mm class UV-A spot cuts repositioning on long welds and flanges. Compare three intensity levels and mains or battery power against ASTM E3022-26.Which Brand Is Best for Fluorescent Insp
2026-10-22 Fourteen questions on choosing a fluorescent inspection lamp: the reports to demand, how imported and domestic brands differ, and how to rank models.In Fluorescent Penetrant Inspection, the
2026-10-22 Fluorescent penetrant testing needs 1000 uW/cm2 at the part surface and under 20 lux of white light. Covers the five steps, working distance and lamp choice.Stroboscopic Observation of High-Speed M
2026-10-21 Match flash rate to pattern period for printed webs, align register with phase trim, and read reciprocating or vibrating parts. LUYOR-906L settings inside.
Email: info@xinysun.com
Tel: 131-2093-6518
Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai
Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447
