Breadcrumb: Home > Solutions > Speed Measurement
Updated:2026-11-02
Views: LUYOR-906L combines a laser tachometer and an LED stroboscope in one portable instrument. A built-in laser speed sensor reads the rotational speed of the target automatically and fires the strobe in step with it, so fast-moving parts appear stationary or slowed and their running condition and defects become visible to the eye. This article covers the principle of stroboscopic observation, the key features of the instrument and typical uses such as motor speed checks, fan blades, print registration and textile spindles, so that site staff can judge whether the method fits their own work.
LUYOR-906L is a portable inspection instrument from LUYOR (Shanghai) that combines laser speed measurement with LED stroboscopic observation. Its built-in laser tachometer identifies the speed of the rotating equipment under test and synchronizes the flash to that speed, so components running at high speed appear "still" or "slow" to the eye, which makes their operating condition clear and hidden faults easier to catch.
A stroboscope illuminates the target with short flashes timed to the rotational speed of the part. When the flash rate matches the speed, the rotating part looks almost stationary, and the inspector can examine the condition and surface defects of blades, spindles, gears and bearings. LUYOR-906L carries a built-in laser speed sensor that tracks the speed automatically and keeps the flash in step, so there is no need to tune the frequency by hand, which makes operation simpler.
Laser auto-tracking: the built-in laser sensor works at a sensing distance of 10 cm - 200 cm, detects the speed automatically and strobes at that rate;
Wide flash range: 60 - 300,000 flashes per minute, with 0.1 flash per minute adjustment resolution, covering common medium- and high-speed rotating equipment;
Precise flash duration: 8 - 50 µs, adjustable, ±1 µs, suited to high-speed inspection without contact;
Handheld and portable: an internal lithium battery gives 3 - 5 hours of continuous operation, with no external power supply, so the unit travels easily to the job;
Two functions in one: it measures speed, strobes in sync for condition observation, and can also send the speed signal to a data acquisition device.
Motor speed measurement: speed of small motors, textile spindles, small power tools and other high-speed rotating parts;
Rotor inspection: synchronized stroboscopic testing of helicopter rotor speed, as an alternative to imported mercury-vapor rotor strobes;
Steel coil: defect inspection on hot-rolled and cold-rolled coil lines, synchronized to line speed to reveal dents and scratches;
Equipment condition monitoring: observation of gears, bearings and fan blades in service, to catch early signs of abnormality;
Periodic vibration measurement: measurement of the speed of a rotating body and of periodic vibration frequencies.
LUYOR-906L brings laser speed measurement and LED stroboscopic observation into one instrument, which makes it a practical tool for speed checks and condition surveys on industrial equipment. Whether the job is measuring motors on a production floor or strobing a high-speed rotor in the laboratory, it turns "invisible high speed" into something the eye can follow, and it is a useful aid for maintenance and quality inspection staff.
This article belongs to the speed and stroboscopic measurement section.
Other sections on the same product line include stroboscopes (which freeze rotation and reciprocation by persistence of vision - you watch the process, not the number) and industrial test instruments (the entry point for the four lines: UV inspection, speed measurement, stroboscopic observation and surface inspection).
The range, accuracy and accessory list of each model are given on its product page.
Email: info@xinysun.com
Tel: 131-2093-6518
Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai
Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447
