Xinysun Instrument (Shanghai) Co., Ltd.

Solutions

Breadcrumb: Home > Solutions > Speed Measurement

How to Choose for Rotational Speed Measurement: Tachometers vs. Sensors

Updated:2026-11-16Views:

Speed and stroboscopic measurement spans three instrument groups: speed sensors, stroboscopes, and portable or panel-mounted tachometers. This article sorts them into six categories by task - stop-motion observation on printing and textile lines, balancing a motor, verifying a line speed, and logging temperature, humidity, voltage or current - and explains what each category is for. Six short definitions follow, with the selection questions that matter for each. The point is to choose by measurement object, mounting condition and downstream interface rather than by price, and to leave margin in the range plus the accessories the job needs.

LUYOR speed and stroboscopic product line

Speed sensors: ROLS-5PW laser sensor (7 m, 1-300 000 rpm) and SPLS-5PW self-powered sensor set (BNC output, built-in display).

Speed display and transmission: LUYOR-910 panel tachometer (dual relay alarm), LUYOR-912 speed transmitter (4-20 mA / RS485).

Handheld measurement: LUYOR-925 portable laser tachometer, range 0-99 999 r/min, working distance 10 m.

Stroboscopic observation: LUYOR-906 / 906UV / 906IR / 906L, 60-300 000 flashes/min, of which the 906L adds automatic laser pattern tracking.


Six categories, find your fit

Speed and stroboscopic instruments divide along three questions: does it touch, does it run continuously, does it record. Decide which category you fall into before looking at specific models.

1. Handheld tachometer: someone walks to the measuring point and reads the value, which suits equipment patrols, fault finding and acceptance checks. Contact or non-contact: laser reflective types measure from a distance and suit high speed and hazardous positions, while contact types with a measuring wheel suit low speed and belt linear-speed calibration.

2. Fixed speed sensor: mounted on the machine long term, outputting pulses continuously to a panel meter, PLC or data logger. Three selection points - whether the target can carry a reflective mark (which decides photoelectric or laser against magnetic and gear-tooth types), mounting distance and offset angle, and output form (TTL, NPN, PNP, open collector) plus supply.

3. Panel tachometer and transmitter: turn sensor pulses into a local display, an alarm relay or a 4-20 mA / RS485 signal for the control system. Suited to overspeed interlock, trend recording and remote monitoring.

4. Stroboscope: uses persistence of vision to freeze rotation or reciprocation, so you watch the process rather than a number - print registration, textile weft insertion, fan blades, vibration phase. LED models offer adjustable flash duration and long life; xenon models give high single-flash brightness for very large parts.

5. Data logging: long-term records of temperature, humidity, pressure, voltage and current, used to verify process conditions and trace an abnormal period, often alongside speed data in equipment condition assessment.

6. Vibration monitoring: vibration acquired in step with speed, for balancing, bearing faults and looseness. Speed is the reference quantity in vibration analysis, so the two are usually used together.

Write down the measurement object, the mounting conditions and the back-end interface, and the model is largely settled; what remains is range margin and accessories (reflective tape, bracket, cable, ingress protection).

Related sections and models

This article sits in the speed and stroboscopic measurement section.

Other sections on the same product line include laser tachometers (aim at the reflective tape and read RPM, one-handed operation), stroboscopes (freezing rotation and reciprocation by persistence of vision, to watch a process rather than a number) and industrial test instruments (the entry point for UV inspection, speed measurement, stroboscopic observation and surface inspection).

Models mentioned in this article: LUYOR-910, LUYOR-912 and LUYOR-925. Range, accuracy and accessory lists for each model are on its product page.

  • Official WeChat QR code

    Email: info@xinysun.com

  • Tel: 131-2093-6518

  • Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai

Official WeChat QR code Follow

Official WeChat QR code

Contact

131-2093-6518

Top