Breadcrumb: Home > Solutions > Fluorescent Inspection
The technical layer of fluorescent inspection: UV-A wavelength and intensity selection, ASTM E3022 and GB/T 5097 compliance, periodic radiometer checks, and common misjudgments and rework causes in fluorescent penetrant inspection, degreasing acceptance, optical glass and coating surface inspection.
365nm or 385nm? Choosing the UV Waveleng
2026-10-24 Security inks differ in excitation: surface marks read at 365 nm, marks under white ink or film need 385 nm, and a UV stroboscope freezes the web.LUYOR-BB Large-Area LED UV Lamp: ASTM E3
2026-10-22 A 280 mm class UV-A spot cuts repositioning on long welds and flanges. Compare three intensity levels and mains or battery power against ASTM E3022-26.Which Brand Is Best for Fluorescent Insp
2026-10-22 Fourteen questions on choosing a fluorescent inspection lamp: the reports to demand, how imported and domestic brands differ, and how to rank models.In Fluorescent Penetrant Inspection, the
2026-10-22 Fluorescent penetrant testing needs 1000 uW/cm2 at the part surface and under 20 lux of white light. Covers the five steps, working distance and lamp choice.5 Common Mistakes in UV-A Fluorescent In
2026-10-20 Five recurring UV-A inspection mistakes: no pre-shift irradiance check, assumed runtime, non-compliant lamps, ignored IP rating and a lapsed calibration log.How to Choose a UV-A Lamp for Aerospace
2026-10-19 Four standards behind aviation UV-A inspection lamps, why LED replaced mercury lamps, and a procurement checklist by workstation type and range.ASTM E3022-26 FAQs: 12 Common Questions
2026-10-18 Scope limited to UV-A LED lamps, revisions against E3022-15, type and unit test reports, misleading compliance claims and radiometer requirements.ASTM E3022-26 In-Depth Analysis: UV-A LE
2026-10-18 Type test versus unit test, the 370 nm peak limit and 1000 uW/cm2 at 127 mm, plus why a 12.7 mm probe and ISO 17025 calibration decide the audit.· Selection and Brands: How to Choose a UV Light Meter: Principles, Units, a Three-Model Comparison and Periodic Verification Methods
· Standards and Compliance: LUYOR-BB Large-Area LED UV Inspection Lamps: ASTM E3022-26 Compliance and Station Configuration
· Operation and Interpretation: 365nm or 385nm? Wavelength Selection for UV Anti-Counterfeiting Inspection and the LUYOR-906UV Application, In Fluorescent Penetrant Inspection, the Blacklight Covers Step Five: Using the LUYOR-3103/3103D for Penetrant Flaw Detection
Email: info@xinysun.com
Tel: 131-2093-6518
Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai
Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447
