Breadcrumb: Home > Solutions > Speed Measurement
Updated:2026-11-17
Views: A laser tachometer that shows no reading is usually a target problem, not a failed instrument. This Q&A covers the questions engineers ask most about tachometers and stroboscopes: what to check when the display stays blank, how to choose between contact and non-contact types, what range and accuracy figures actually mean, how stroboscopic freeze-frame observation relates to a measured RPM, what signal a laser speed sensor sends, and how wiring and field interference affect the result. Answers give the step to take rather than a general discussion, so the page works as a quick reference for selection and for daily inspection rounds.
Common causes: no reflective tape on the rotating surface, or tape that has worn through; too large an incidence angle or a working distance beyond the rated range; rotation below the lower limit; strong ambient light. Apply a clean dedicated reflective target, keep the laser perpendicular to the tape, and confirm the speed sits inside the measuring range.
Non-contact types (laser or photoelectric) never touch the rotating part: they measure from a distance and are safer, which suits high-speed or hard-to-reach equipment such as motor shafts and fan spindles. Contact types with a measuring wheel suit linear speed and surfaces that are easy to press against. If the machine allows contact and linear speed is what you need, choose a contact or combination model.
A tachometer returns a speed value. A stroboscope flashes in sync with the rotation so a fast-moving part appears to stand still, which is used to watch running condition and surface defects; it can also be used to determine speed. The two are often used together: one measures, the other shows.
Take LUYOR ROLS-5W as an example: it outputs a 5V TTL pulse, one or more pulses per revolution, and connects directly to speed displays, data loggers, vibration analyzers and stroboscopes for remote recording and analysis.
The instrument head measures rotational speed. For linear speed, fit a contact measuring wheel, or multiply the speed by the circumference. Some combination models can switch the display to linear speed units.
Keep the reflective target clean; do not look into the beam of a laser instrument for long periods; check alignment when working at distance; clean the sensor lens after use and store the instrument properly.
For selection advice on a specific machine, contact Xinysun Instruments. We supply LUYOR laser tachometers, LUYOR speed sensors and stroboscopes, along with other test instruments.
This article sits in the frequently asked questions section.
Other sections on the same product line include laser tachometers (aim at the reflective tape and read RPM, one-handed operation), stroboscopes (freezing rotation and reciprocation by persistence of vision, to watch a process rather than a number) and industrial test instruments (the entry point for UV inspection, speed measurement, stroboscopic observation and surface inspection).
Models mentioned in this article: LUYOR-910, LUYOR-912 and LUYOR-925. Range, accuracy and accessory lists for each model are on its product page.
Email: info@xinysun.com
Tel: 131-2093-6518
Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai
Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447
