Xinysun Instrument (Shanghai) Co., Ltd.

Applications

Breadcrumb: Home > Applications > Lab Research

UV Mutagenesis Breeding of High-Yield CGTase Strains: How to Use the LUYOR UCL-3200

Updated:2026-11-02Views:

Industrial production of cyclodextrin runs through CGTase, and what really holds back downstream applications is the cost of the enzyme: low-yield strains make an expensive enzyme. In the paper described here, EMS was tried and did not work - none of 36 clones improved on the parent - and UV mutagenesis then raised output noticeably. The article covers how UCL-3200 was used in the study, how a survival curve is used to set the dose, why plates are wrapped in foil and incubated in the dark after irradiation, and an eight-step procedure that can be followed directly.

Cyclodextrins are cyclic oligosaccharides with a hydrophobic cavity in the middle of the molecule that can take in poorly soluble, volatile, light- or heat-sensitive molecules and form inclusion complexes, changing their solubility, stability and reactivity. Food, pharmaceuticals, cosmetics, textiles and agriculture all make use of this property. Industrial production of cyclodextrin runs through one enzyme - cyclodextrin glucanotransferase (CGTase, EC 2.4.1.19), which converts starch into cyclic dextrins. What really holds back downstream applications is the production cost of that enzyme: low-yield strains make an expensive enzyme.

A 2026 paper in Экобиотех / Ecobiotech used UV mutagenesis to improve a CGTase-producing bacterium, Paenibacillus sp. IB-663, and screened three higher-yield mutants out of 45 clones. The mutagenesis equipment is stated explicitly: the UV lamp sits inside a UV crosslinker, UCL-3200 (LUYOR, China). This article follows that thread: which variables UV mutation breeding actually has to control, what role UCL-3200 plays in this kind of experiment, and which details in the procedure decide the outcome.

The problem the paper set out to solve: raising CGTase yield

There are two broad routes to improving enzyme production in a microorganism. One is genetic engineering - homologous and heterologous recombination, site-directed mutation, adaptive evolution - and all of these share a precondition: you already know where to make the change. The other is random mutagenesis, using chemical mutagens (EMS, NTG) or a physical agent (UV) to introduce mutations across the whole genome and then screening for what you want. The paper is candid about the two: site-directed mutation is technically complex and needs dedicated reagents and equipment, which makes it less economical than random mutagenesis at industrial scale; and earlier work on raising CGTase yield with physical and chemical mutagens was almost absent, which left a gap worth filling.

ItemContent
TitlePhysical and chemical mutagenesis to raise cyclodextrin glucanotransferase production in Paenibacillus sp. IB-663
AuthorsUshmaeva U.A. (ITMO University / Almetyevsk State Technical University), Milman P.Yu., Gilvanova E.A. (Ufa Institute of Biology, Ufa Federal Research Centre, Russian Academy of Sciences)
JournalЭкобиотех / Ecobiotech, 2026, volume 9, issue 3, pages 354-364
DOI10.31163/2618-964X/2026-27
Starting strainPaenibacillus sp. IB-663 (Ufa Institute of Biology collection number UIB-63, 16S rRNA sequence GenBank FN547418.1)
Mutagenesis equipmentUV crosslinker UCL-3200 (LUYOR, China)

EMS was tried and did not work: none of 36 clones improved

The paper began with chemical mutagenesis. Cell suspension was treated with ethyl methanesulfonate (EMS) at 0.03%, 0.04% and 0.05%, sampled at 20, 40 and 60 minutes, and plated; survival was used to assess the dose.

EMS concentration20 minutes40 minutes60 minutes
0 (control)100100100
0.03%27.4821.5310.76
0.04%19.547.363.96
0.05%000

(Figures in the table are survival rates in %, with the control counted as 100; data from Table 1 of the paper.)

At 0.05% the concentration is lethal for this strain and nothing grows. From the two surviving concentrations 36 clones were picked, and none of them produced more CGTase than the parent.

The paper offers two explanations, and both are worth noting. One is that EMS mainly alkylates bases, guanine in particular, and produces point mutations; such a mutation may fall nowhere near a site that affects yield, or it may make the enzyme less stable. The other is that CGTase catalyzes four reactions (cyclization, coupling, disproportionation and hydrolysis), and EMS treatment may raise hydrolytic activity while lowering cyclization activity - and the screen in this paper measured cyclization. In other words, "higher yield" means different things for different reaction types, and the indicator you measure determines what you end up selecting.

How UCL-3200 was used in the paper

The UV mutagenesis section of the methods is written in concrete terms (the original is in Russian; this is a literal translation):

"UV mutagenesis was carried out with a UV lamp inside a UV crosslinker UCL-3200 (LUYOR, China), at an irradiation distance of 15 cm, with the radiation energy varied over the range 0.03-0.08 J and an irradiation time of 10 seconds. After irradiation the plates were wrapped in foil and incubated in the dark for 24 hours to avoid photoreactivation."

ParameterValue in the paperNote
EquipmentUV crosslinker UCL-3200 (LUYOR)254 nm version, 6 × 8 W tubes
Irradiation distance15 cmDistance from sample to tube; has to be recorded together with the dose
Radiation energy0.03-0.08 JSet by energy in the paper, not by time
Irradiation time10 secondsIn energy mode the instrument integrates and stops at the set value
Post-irradiation handlingWrapped in foil, incubated in the dark for 24 hBlocks photoreactivation
Sample formCell suspension spread on K1 agar plates, undilutedPlates go straight to incubation; each colony that grows is a mutant clone

One point here is easy to skip and has a large effect on the result: the paper sets energy in joules, not "irradiate for so many seconds". That is exactly what the energy mode of a UV crosslinker does - the microprocessor monitors UV intensity inside the chamber and integrates over time, stopping automatically when the set value is reached. If the tubes have aged and dimmed, it irradiates a little longer; if intensity is high, it stops earlier. For mutagenesis this decides whether the experiment can be reproduced at all: mutation rate and survival are both set by dose, and "10 seconds" carries no dose information, so the numbers no longer match on another machine or another set of tubes.

The survival curve is the basis for setting the dose: reading Table 2

Radiation energy (J)Colonies (CFU/100 µL)Survival (%)Mutant clones obtained
0 (control)3533000100—
0.033700.01—
0.052980.008—
0.06280.0007—
0.07170.000412, 21
0.08110.00036

Three layers of information come out of this table.

Killing exceeded 99% at every dose, yet higher-yield clones came from just the 0.07 J and 0.08 J levels. The paper's explanation: the higher the dose, the more mutations accumulate, and it may take several mutations together to produce a positive effect on yield - a trait like yield is usually not decided by a single gene.

Colony counts landed in a pickable range. The paper notes specifically that at 0.03-0.08 J, undiluted plates yield the 30-300 colony window that can be analyzed. This is a practical point in any mutagenesis experiment: too low a dose and the plate turns into a lawn with no single clones to pick; too high a dose and nothing grows at all, which wastes the round.

Survival and "getting the mutation you want" are not related in a simple linear way. The 0.03 J and 0.05 J levels actually left more survivors, and none of them was useful. Dose therefore has to be read together with screening results; survival alone cannot fix the dose.

Why plates must be wrapped in foil and incubated in the dark

This step gets one sentence in the paper, but it belongs to the category where skipping it causes problems.

UV damage to DNA is mostly in the form of pyrimidine dimers, thymine dimers in particular. Bacteria carry photolyase, which on excitation by visible light (roughly 300-500 nm) can split the dimer and repair the damage - this is photoreactivation. If plates go straight under normal lighting after irradiation, part of the freshly induced mutation is repaired on the spot, and survival and mutation rate from two runs at the same dose no longer agree.

There are three practical measures: wrap the plates tightly in tin foil or aluminum foil immediately after irradiation; complete the 24 h incubation in darkness; and keep strong direct light away during colony picking and streak subculture as well. UCL-3200 itself is a closed chamber, so the irradiation step needs no extra shielding - the critical window is the time after the plates come out.

Mutagenesis is just the start; screening throughput is the bottleneck

Irradiation yields 45 clones, and the next task is to find the few that actually produce more. If that step is slow, even good mutagenesis is worth little.

The paper used the phenolphthalein assay, and ran it on 96-well plates: β-cyclodextrin forms an inclusion complex with phenolphthalein that decolorizes the reaction mixture, and the degree of decolorization is read as absorbance at 553 nm on a microplate reader. Culture supernatant from a high-yield clone fades the phenolphthalein reagent to pale pink; a low-yield clone barely changes it, and it stays deep pink. The parent strain served as positive control, and a Bacillus subtilis IB-54 strain with high amylase activity but no CGTase served as negative control - that control matters, because it rules out the false impression created when amylase consumes the substrate directly.

Screening formatThroughputWhat it givesCost
Plate halo / color zoneMedium, tens per plateRough indication of enzyme productionWeak quantification; halo size depends on diffusion
Phenolphthalein assay on 96-well plates with a plate reader (used here)High, over a hundred per roundSemi-quantitative comparison of cyclization activityMeasures cyclization activity, not total protein or hydrolysis
HPLC for cyclodextrinLowAccurate quantification and product profileSlow and consumable-heavy; suits final screening

The order in the paper was 96-well plate pre-screening to narrow the field to three clones, then shake-flask fermentation curves over 96 h. That sequence - broad then deep - is worth copying: mutagenesis produces many clones, so a cheap and fast method is used to cut the number down before the slow method is applied.

Results: how much better, and at what point in time

Three clones (numbered 6, 12 and 21) showed CGTase activity at 48 h that was 1.17-1.34 times that of the parent. Set against the 96 h fermentation curve, the picture is more complete:

IndicatorResultTime pointMeaning
Peak CGTase activity14.8%-19.7% above the parent72 hOutput ceiling at the end of log phase and stationary phase
Peak biomass6.5%-12.1% above the parent72 hSomewhat more growth, but not the main driver of yield
Activity drop from 72 to 96 hParent 55.1%; clone 6 43.8%; clone 12 25.9%; clone 21 29.3%Decline phaseClones 12 and 21 fall more slowly, giving a longer production window
Growth phaseMutants and parent follow the same time courseWhole runUV mutation did not disrupt core growth or secretion machinery

Two conclusions deserve separate mention.

A higher peak and a slower decline are two different things. Clones 12 and 21 did not show a dramatic peak gain, but between 72 and 96 h they fell clearly more slowly than the parent - the paper attributes this to the 0.07 J level delaying the decline phase and extending production time. For industrial fermentation the latter may be worth more than the former, because time in the tank is cost.

The growth curves of the mutants overlap the parent. This suggests that although UV introduced many random mutations, it did not disturb the core genes and regulatory logic responsible for growth and secretion, and more likely touched individual regulatory elements such as promoters or transcription factors. That matters for scale-up: a mutant that grows like the parent and simply produces more lets existing process parameters be carried over largely unchanged.

One difference in reporting needs a caution: the abstract states yield at 1.4 times the parent, the 48 h data in the body give 1.17-1.34 times, and the 72 h peak gain is 14.8%-19.7%. The three figures refer to different time points and indicators, so quote the time point explicitly.

An eight-step procedure that can be followed directly

StepOperationKey point
1Grow seed culture to OD600 0.5-0.6 (K1 medium, 37 ℃, 160 r/min)Take mid-log phase cells; keep the state consistent between batches
2Harvest by low-temperature centrifugation, wash twice in 0.9% sterile sodium chloride and resuspendRemove medium components so organic matter does not shield the UV
3Spread the cell suspension on K1 agar plates without dilutionPlates go straight to incubation; what grows is the mutant clone
4Irradiate in UCL-3200 at the set energy (0.03-0.08 J in the paper, 15 cm, 10 s)Use energy mode, not time mode
5Wrap tightly in foil immediately after removal, incubate at 37 ℃ in the dark for 24 hBlocks photoreactivation
6Pick single colonies to fresh plates, incubate at 37 ℃ for 12 hFix the mutation and avoid mixing genotypes within one colony
7Liquid culture in 96-well plates, phenolphthalein assay read at 553 nmInclude a parent positive control and a negative control that does not produce the target enzyme
8Run candidate clones through fermentation curves in shake flasks, sampling at 48-96 hLook at the peak and at the drop during decline

There is no universal value for the dose in step 4. The 0.03-0.08 J in the paper is tied to the 15 cm distance and the 10 s time together; change the machine or the distance and a new survival curve has to be run. The approach is to set 4-5 levels from low to high, plot survival against dose, and then run the one or two levels that give 30-300 colonies.

Where UV mutagenesis fits and where it does not

ScenarioSuitableReason
Target gene unknown; the aim is simply to improve a quantitative trait such as yield or toleranceSuitableNo prior knowledge of the site is needed, and stacked random mutations often work
Traits governed by several genes together (secretion level, product profile, stress tolerance)SuitableThis is the case the paper describes, where several mutations together produce the effect
Limited budget and equipment; a usable strain is needed quicklySuitableSimple equipment, no chemical residue or inactivation step
Replacing one specific amino acid with anotherNot suitableRandom mutagenesis cannot control the site; site-directed mutation is the route
Target already known, a single site to be changedNot suitableSame as above
Total mutation count must be controlled, single point mutations requiredNot suitableAt high dose, UV introduces many mutations

The paper is itself a good example: EMS and UV work by two different mechanisms - EMS alkylates bases and produces point mutations, UV forms pyrimidine dimers that cause errors in replication and repair. For this Paenibacillus, the former had no effect and the latter worked. Where conditions allow, running both routes in parallel is a better bet than backing one.

Choosing a UV crosslinker for UV mutagenesis

Three UV crosslinkers are listed on this site, and the points that matter for mutagenesis differ somewhat from those for membrane crosslinking.

ModelWavelength and tubesChamber sizeEnergy/time settingPositioning for mutagenesis
UCL-3200254 nm, 6 × 8 W32 × 26 × 15 cm0-9.999 J/cm²; 0-99.59 min; 9 presetsThe model used in the paper. Plates lie flat in a single layer, and energy mode keeps the dose reproducible
UCL-3500254 nm, 6 × 15 W44 × 34 × 15 cm0-9.999 J/cm²; 9 presetsSeveral plates or large samples at once; the same dose takes less time
UVP CL-3000254 nm, 6 × 8 W35 × 27 × 16 cm0.1-9999.9 mJ/cm²; 000:01-999:59Real-time dose monitoring and a viewing window in the door; the choice where a quality system already names that brand

Selection for mutagenesis comes down to three questions: whether the dose can be set and reproduced, which matters more than power; whether the chamber is tall enough for petri dishes and lets plates lie flat in a single layer in the center area (all three have an internal height of 15-16 cm, which is ample for plates); and whether several plates are processed at once, in which case look at UCL-3500.

The dose has to be settable and also verifiable

Energy mode solves the problem of "the tubes changed but the dose did not". It does not solve one other thing: the intensity that actually reaches the sample inside the chamber drifts as tubes age, as reflectors collect dust and as the quartz shield becomes contaminated. In a mutagenesis experiment that drift shows up directly as "the same set value gives a higher survival rate every year".

Two controls are advisable: measure irradiance at several fixed positions inside the chamber with an external UV radiometer at intervals, cross-check it against the instrument display and record it in the equipment log; and set an action threshold - for example, when measured intensity falls below 70% of the initial value, or the time needed to reach the same dose becomes noticeably longer, schedule tube replacement or recalibration. The output of low-pressure mercury tubes falls steadily with hours of use, and the common replacement criterion in the industry is decay to about 70% of initial value; at that point the tube still lights and energy mode still reaches the set dose, it just takes longer, which is exactly what gets overlooked. Radiometers for this check can be selected from the UV radiometer section.

Closing remarks

The value of this paper is not just that yield rose by a dozen or so percent, but that it walks the old road of UV mutagenesis in a disciplined way: dose set by energy, a survival curve, dark incubation after irradiation, high-throughput pre-screening to cut numbers down, then a full fermentation curve. Every step is written into the methods section, so others can repeat it.

And every step carries a requirement on the equipment - the dose has to be settable, reproducible and verifiable, and chamber size and safety come after that. For more on selecting a UV crosslinker and setting dose, see the UCL-3200 product page and the UV crosslinker section; if you are working out conditions for mutagenesis or membrane crosslinking, tell us the strain, the sample form and the target indicator and we can settle the wavelength version, dose gradient and preset programs together.

Related sections and models

This article sits in the laboratory research techniques section.

Other sections on the same product line are UV crosslinkers (dose set in J/cm², the number that matters for both nucleic acid crosslinking and material curing) and life science instruments (the entry point for fluorescence imaging, UV crosslinking, UV transmission and cell irradiation).

Models mentioned in this article: UCL-3200, UCL-3500, UVP CL-1000. Ranges, accuracy and accessory lists for each model are given on the product pages.

  • Official WeChat QR code

    Email: info@xinysun.com

  • Tel: 131-2093-6518

  • Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai

Official WeChat QR code Follow

Official WeChat QR code

Contact

131-2093-6518

Top