Xinysun Instrument (Shanghai) Co., Ltd.

Applications

Breadcrumb: Home > Applications > Lab Research

Pea PsLykX Gene Editing Validation and Hairy Root Fluorescence Screening: How to Use the LUYOR-3415RG

Updated:2026-11-02Views:

Symbiosis between pea and rhizobia is selective: if the plant receptor does not recognize the nodulation factor, no nodule forms. Work published in Transgenic Research in 2026 used CRISPR-Cas9 to knock out PsLykX in pea, and the edited roots lost the ability to nodulate entirely, giving functional evidence for the identity of the long-sought Sym2 gene. This article explains the design of that experiment, why hairy-root systems stall at the screening step, and compares three screening methods. It then sets out a six-step fluorescence screening routine using the LUYOR-3415RG dual-wavelength excitation source, including its 180 mm spot at 150 mm and its 0.9 kg body.

The symbiosis between pea and rhizobia is a selective affair: not just any rhizobium strain will nodulate any pea line. The plant recognizes the nodulation factor (Nod factor) secreted by the bacterium through a receptor, and a matching pair is needed for the bacterium enter through a root hair and form a nitrogen-fixing nodule. A study published in Transgenic Research in 2026 used CRISPR-Cas9 to knock out the pea PsLykX gene, and the edited roots lost the ability to nodulate completely - direct functional evidence that PsLykX is the Sym2 gene that had been sought for decades.

The study used an Agrobacterium rhizogenes-mediated hairy-root transformation system, in which edited roots had to be picked out by fluorescence before sequencing confirmation and nodulation assays. The hairy-root screening step used the portable dual-wavelength fluorescent protein excitation source LUYOR-3415RG. This article follows that experimental chain: why gene-editing work on symbiotic nitrogen fixation stalls at hairy-root screening, and how to do that step quickly without damaging the material.

Sym2 and PsLykX: a gene pursued for decades

The pea Sym2 gene was described through phenotype long ago but was never cloned. It exists in different allelic forms that set how broad or narrow the symbiosis specificity is: pea lines carrying the Sym2A allele (mostly from Afghanistan and the Middle East) require an extra acetylation on the rhizobial Nod factor for successful infection, while the Sym2E allele (European material) has no such requirement. From this it was inferred that Sym2 encodes a Nod factor receptor.

PsLykX belongs to the LysM receptor-like kinase (LysM-RLK) gene family, and its allelic state matches symbiosis specificity closely, which made it a strong candidate for Sym2. In 2019 a team from ARRIAM and St Petersburg State University found further narrow-specificity pea accessions in the VIR germplasm collection, whose LykX was either identical to the Afghan type or carried a second allele - the latter differing from the European type by a single nucleotide causing an amino acid substitution (R75P). The correlation was strong, but genetic evidence was still missing.

PeriodProgressType of evidenceWhat was still missing
Early geneticsThe Sym2 locus sets the breadth of symbiosis specificity; Sym2A requires Nod factor acetylationPhenotype and allelism testsGene not cloned
Candidate gene stagePsLykX (LysM-RLK) allelic state matches specificitySequence and allele associationCorrelation alone, no functional evidence
2019New Sym2A sources found in the VIR collection, with a second LykX allele (R75P)Allelic diversity and phenotypeStill no knockout validation
2026CRISPR-Cas9 knockout of PsLykX in Caméor; edited roots lose nodulationGene-editing functional validationFull equivalence of Sym2 and PsLykX needs testing across more alleles and strain combinations

The key design of the 2026 experiment

The clever part of the design was that it sidestepped the bottleneck of stable pea transformation: Agrobacterium rhizogenes induces hairy roots, editing happens inside the root, and the result is a composite plant with a wild-type shoot and transgenic roots. Edited roots are obtained without going through a full regeneration pipeline.

StageMethodPurpose
TransformationAgrobacterium rhizogenes-mediated hairy-root transformation, with the vector carrying both CRISPR-Cas9 and a fluorescent marker cassetteGenerate editing events in roots and distinguish transgenic roots by fluorescence
Positive root screeningObserve fluorescence with a portable dual-wavelength excitation source; keep positive roots and discard negative onesRemove untransformed roots so later counts are not diluted
Edit confirmationSequence the fluorescence-positive roots to confirm editing at the target siteSeparate "the construct went in" from "the edit succeeded"
Phenotype observationInoculate Rhizobium ruizarguesonis RCAM1026 and score nodulationAnswer whether the gene is required

The result was unambiguous: roots with a confirmed editing event had lost the ability to form nodules. PsLykX is therefore required for symbiosis in the Caméor and RCAM1026 combination.

Why hairy-root systems stall at screening

Hairy-root transformation has three features that make screening necessary, and necessary early:

Start with the mixed root population. A single composite plant grows both transgenic and non-transgenic roots, and they look almost identical. Skip screening and take the whole plant into a phenotype assay, and the signal from edited roots is diluted or even masked by the wild-type majority.

Second, the material is precious. A transformation takes weeks, and every root is a sample source for later sequencing and nodulation work. Cutting a piece off for PCR means that root can no longer be used.

Third, timing matters. The roots are growing and the inoculation window is limited; a one-day delay in screening pushes the whole downstream schedule.

Together, these three requirements mean the screening method must be non-destructive, high enough in throughput, and able to give an answer on the spot.

Comparing three screening methods

MethodDestructive?Time to resultThroughputWhat it distinguishesLimitation
Root-by-root PCR / sequencingRequires sampling; root is destroyedHours to daysLowWhether the construct is present, whether editing occurredHigh cost, and positive roots are already consumed
Fluorescence microscopyUsually needs slide preparation or excisionModerateLow, one focus at a timeWhether the fluorescent marker is expressedFixed equipment, limited throughput
Portable excitation source (LUYOR-3415RG)No, whole living plantOn the spot, secondsHigh, 180 mm diameter per pass at 150 mmWhether the fluorescent marker is expressedJudges marker expression alone, not the editing event

The three are not substitutes but layers: fluorescence screening takes the positive roots out and keeps them alive, while sequencing confirms whether that root is actually edited. Screening with an excitation source up front and sending just the positives for sequencing cuts both the cost and the time of the experiment.

Where the LUYOR-3415RG fits in this kind of experiment

The 3415RG is a dual-wavelength excitation source with two switches on the body, each selecting one excitation band. The standard configuration pairs RB royal blue (440-460 nm) with GR green (510-540 nm), which matches the two marker classes usually found in such work - green fluorescent protein (GFP, eGFP) and red fluorescent protein (DsRed, tdTomato, mCherry). For symbiotic nitrogen fixation work, where several constructs and several markers often run at once, one lamp switched back and forth is simpler than keeping two single-wavelength lamps.

CodeExcitationFilter (emission)Observable
R (royal blue)440-460 nm500 nmGFP, eGFP, fluorescein
C490-515 nm550 nmYFP, Venus, yellow fluorescent protein
G (green)510-540 nm600 nmDsRed, tdTomato, mCherry
V (violet)400-415 nm460 nmCFP, BFP
U (UV)360-380 nm415 nmDAPI, Hoechst

The bands are fixed at assembly: choose two of the five and specify the combination for the two fluorescent proteins you intend to view when ordering, and no wavelength arithmetic is needed. On the hardware side, one band uses 6 x 3 W LEDs and two bands total 12, for 27 W; the illuminated diameter is 180 mm at 150 mm from the lamp; net weight is 0.9 kg; the body measures 180x200 mm; power comes from a rechargeable battery; LED life is 50,000 hours; LUV-30A and LUV-50A viewing goggles are included, with a bracket and photographic filter available as options.

Three of these specifications matter in hairy-root screening. One, the illuminated area is large enough that the root system of a seedling is covered in one pass, with no need to move the lamp segment by segment. Second, at 0.9 kg handheld it can be carried between incubator, greenhouse, and clean bench, so material does not have to be moved. Third, battery power plus a bracket allows long runs of large sample batches.

The six-step screening routine

StepActionParameters and pointsOutput
1 DarkenDraw blinds, switch off overhead lamps, or use the supplied shading cloth to reduce ambient light as far as possibleThe lower the ambient light, the better the contrast-
2 Select bandSwitch according to the construct marker: RB for GFP, GR for DsRed/mCherryTwo switches, no lamp change needed-
3 Put on gogglesWear the matching filtered viewing goggles (LUV-30A / LUV-50A included)Mismatching goggles and band leads directly to missed calls-
4 PositionHold the head about 150 mm from the material, covering the whole root systemToo far weakens the signal, too close misses part of the roots-
5 Judge and markCall a root positive when it glows evenly along its length; note partial glow or blurred boundaries as doubtfulRe-check from another angle to exclude glare and ghostingPositive roots tagged and photographed
6 Record and submitPhotograph for the record, then sample positive roots for sequencing to confirm the editing eventPhotos must carry a number and dateLab record plus sequencing samples

Where misjudgments come from

Fluorescence screening looks simple, and the failure points are in fact concentrated:

SymptomUsual causeCountermeasure
The whole root glows redAutofluorescence of chlorophyll and similar compounds under green excitationUse an untransformed root as a negative control and suppress background with the filter and goggles; culture root material in the dark where possible
Signal varies from strong to weakChange in distance or angle, edge of the spotKeep the distance at about 150 mm and place roots in the center of the spot
A root that should glow does notGoggles mismatched to the band, insufficient darkening, weak marker expressionBegin by checking the chain with a known positive control; where expression is weak, use a bracket to extend viewing time
Photo color does not match what the eye seesCamera white balance not matched to the filterUse the matching LUV photographic filter (67 mm, direct mount for SLR or phone)
Glows but sequencing shows no editConstruct integrated but not editedA normal outcome; fluorescence does not replace sequencing, so handle it as in step 6

What fluorescence screening can and cannot prove

One sentence deserves a place in the lab record: a positive fluorescence signal proves that the marker cassette was transferred, not that the target site was edited. The 2026 paper could reach its conclusion because the edited roots also went through sequencing confirmation. The excitation source solves screening throughput and material survival; edit confirmation still rests on sequencing, and the division of labor must not be blurred.

Conversely, fluorescence screening should not be skipped on the grounds that sequencing is needed anyway. Sequencing every root one by one costs far more in money and time than lighting the whole batch up front and submitting just the positives - and sequencing requires a sample, so a root that has been sampled can no longer be used for nodulation phenotyping.

Published literature in this direction

Several published papers document the use of the 3415RG in legume symbiotic nitrogen fixation and hairy-root systems (compiled from manufacturer records):

StudySpecies and systemFluorescent markerUse
Nature Plants 2025 (Ren et al., iron signaling and nodulation via BTSa-NSP1 in soybean)Soybean hairy rootsGFPScreening of positive transgenic hairy roots
Nature Communications 2024 (Qiao et al., peanut intercropping and nitrogen fixation)Peanut root colonizationGFP (440/500 nm)Observing colonization of the root surface by the labeled strain
Antioxidants 2023 (BcWRKY22 and heat tolerance in non-heading Chinese cabbage)Chinese cabbage hairy rootsGFPConfirming that overexpression roots were obtained
Agronomy 2023 (establishing a CRISPR system in Limonium bicolor)Limonium bicolor hairy rootsDsRed2Identifying transformants by red fluorescence in roots
PNAS 2026 (cardiac glycoside biosynthesis in Periploca sepium)Periploca sepium hairy rootsDsRedScreening of RNAi-positive hairy roots

The 2026 pea PsLykX work is one application of this approach to a symbiosis specificity receptor gene: pick the transgenic roots out by fluorescence, then lock down the editing event by sequencing, then score the nodulation phenotype.

How the related light sources divide the work

ModelForm and bandsApplications
LUYOR-3415RGHandheld dual-wavelength, RB + GR as standardRapid GFP/DsRed screening of whole plants, root systems, seeds, and field material
LUYOR-3421Bench modelBatch viewing on the bench: petri dishes, well plates, colonies
LUYOR-3124RB/3260RBHandheld single-wavelength (royal blue)GFP as the sole marker, where light weight matters
LUYOR-3280Handheld single-wavelength, interchangeable modulesA single marker type but an unusual band

Selection really comes down to two questions: whether one lamp must show two marker colors, and whether the work is mainly whole living plants or small samples on a bench. Answer both and the model is settled.

Conclusion

From allelic association of a candidate gene to functional evidence from a CRISPR knockout, the pea Sym2 question has moved a long way forward; and the everyday step that supports such experiments is often something as concrete as picking out the positive roots. With the right tool that step goes from days to minutes, and the material stays intact.

For more on hairy roots and transgenic screening, see these two articles: tissue-culture-free hairy-root transformation in raspberry: fast screening of eGFP-positive roots and six fluorescence viewing scenarios for the LUYOR-3415RG. Full selection guidance for excitation sources is in the GFP fluorescent protein excitation source section. If your work involves several fluorescent markers, or needs roots and seeds viewed in the same session, tell us the marker types and sample forms and the band combination and bracket configuration can be worked out together.

Related sections and models

This article belongs to the laboratory research techniques section.

Other sections on the same product line include GFP fluorescence flashlights (models by GFP/RFP/DsRed band, handheld and bench), semiconductor particle detection (grazing light to locate, fluorescence to identify organics, counting for concentration - three complementary methods), and life science instruments (the entry point for fluorescence imaging, UV crosslinking, UV transmission, and cell irradiation).

Models mentioned: LUYOR-3415RG, LUYOR-3421, LUYOR-3124RB. Ranges, accuracy, and accessory lists for each model are given on the product pages.

  • Official WeChat QR code

    Email: info@xinysun.com

  • Tel: 131-2093-6518

  • Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai

Official WeChat QR code Follow

Official WeChat QR code

Contact

131-2093-6518

Top