Xinysun Instrument (Shanghai) Co., Ltd.

Applications

Breadcrumb: Home > Applications > Lab Research

How to Choose a UV Transilluminator? 254/302/365nm Wavelengths, Lamp Tube Count, and Gel Cutting/Sample Protection Explained

Updated:2026-11-17Views:

UV transilluminator, UV transilluminator table, and UV gel cutter are several names for one class of instrument: UV tubes inside the housing, filter glass across the surface, and light transmitted evenly up through the gel, so dyes such as EB and GelRed emit orange-red fluorescence and bands and markers become visible. This article explains what 254, 302, and 365 nm each solve, how tube count and illuminated area are matched to gel size, where ng-level sensitivity actually comes from, and how a UV unit divides the work with a blue-light transilluminator.

What is a UV transilluminator, and is it the same as a UV table or a gel cutter?

They are several names for one class of equipment. A UV transilluminator (also called a UV transilluminator table, UV gel cutter, gel transilluminator, UV viewing box, or benchtop UV transilluminator) is the viewing platform used after nucleic acid and protein gel electrophoresis: UV tubes are mounted inside the housing, the surface is covered with special UV filter glass that transmits UV light evenly up onto the gel, and the complexes formed when dyes such as EB, GelRed, and SYBR bind DNA emit orange-red fluorescence in a darkened room, so bands and markers become visible.

The differences in naming come from the emphasis in use: "UV transilluminator table" stresses the light-transmitting surface structure; "UV gel cutter" stresses cutting the target band out of the gel with a blade for recovery; "gel transilluminator" and "UV viewing box" (also spelled UV view box) appear mostly in imaging, photography, and methods sections of papers; and "benchtop UV transilluminator" distinguishes the instrument from handheld UV lamps and enclosed imaging systems. Search by any of these terms at procurement and you land on the same class of equipment.

For the full category and the models on offer, see the UV transilluminator section.

Start with wavelength: what 254 nm, 302 nm, and 365 nm each solve

  • 254 nm (shortwave UV-C): high energy and bright fluorescence, common for EB-stained gels in earlier years. The drawback is marked DNA damage - pyrimidine dimers form easily, the transformation efficiency of fragments recovered from the gel drops, and ozone generation is higher. It is now used mostly for sterilization and UV crosslinking; gel viewing and band excision have largely moved away from it.
  • 302 nm (midwave UV-B): the compromise between fluorescence intensity and sample damage, and the usual band for routine gel viewing, photographic records, and band recovery. Day-to-day observation in most molecular laboratories falls in this range.
  • 365 nm (longwave UV-A): little DNA damage, suited to excision work where the recovered fragment will be ligated, transformed, or sequenced, and suited to prolonged observation. Fluorescence is dimmer than at 302 nm, so reading requires a darker environment.

If one instrument must both view and excise, choose a switchable dual-wavelength model; if viewing and recording in a dark room is all you need, a single 302 nm wavelength is enough. Surface brightness also depends on tube count and filter glass quality - wavelength is just one of the variables.

Then tube count and illuminated area: what 8×8W and 26×21 cm mean

The brightness of a UV transilluminator is set by total tube power and packing density. In the common 8 × 8W configuration the tubes are spaced evenly below the surface, and a diffusing structure spreads the light so that brightness stays as even as possible across the 26×21 cm illuminated area - this determines whether bands at the edge of a gel can be read as well as those in the middle, and whether corners must be darkened in post-processing for photographs.

Choose the illuminated area by gel size: for a routine small gel of about 10×10 cm, a 26×21 cm surface is more than enough and can hold two gels side by side; for precast gels or large screening gels, confirm the surface covers them completely so that edge bands do not fall into a dark zone. When the surface is too small, operators tend to slide the gel around, and excision is easily misaligned.

Where ng-level sensitivity comes from: filter glass, dark room, and imaging

The faintest band a UV transilluminator can show depends on three conditions acting together:

  1. UV filter glass: it blocks the visible light from the tubes and passes UV. The less visible light leaks through, the darker the gel background and the higher the fluorescence contrast, so a weak ng-level band is not swallowed by background.
  2. Ambient illuminance: a dark room or a light hood is a prerequisite. With ceiling lights on, even a good surface will not reveal a weak band.
  3. Exposure and dye: when photographing with a phone plus UV filter or a gel documentation system, exposure time, aperture, and dye concentration together decide whether a weak band can be recorded. Visual reading and image capture are two different tasks - visual reading relies on eye adaptation to darkness, image capture on parameter settings.

At purchase, ask the supplier for real images of a marker dilution series at the same concentration steps; that is more reliable than the word "sensitivity" on its own.

How to choose between a UV and a blue-light transilluminator

The dividing line is not better versus worse, it is the dye system:

  • For EB, GelRed, and other dyes that need UV excitation: choose a UV transilluminator. These dyes excite efficiently near 302 nm, giving bright bands and low consumable cost, and this is the routine configuration in most molecular laboratories.
  • For non-toxic dyes such as SYBR Green, SYBR Safe, GelGreen, and SYPRO Ruby: choose a blue-light transilluminator (470 nm LED). Blue light does not induce pyrimidine dimers, so DNA recovered from the gel can go straight into ligation, transformation, and sequencing, and no UV face shield is needed during work. The trade-off is that EB barely fluoresces under blue light, and sensitivity for very small amounts of sample is somewhat lower.
  • If both dye systems are in use: one UV unit and one blue unit, or a model with a blue module. Parameters for the blue units are on the LUV-450 LED blue-light transilluminator page, and a dye-by-dye sensitivity comparison is in How to choose between a blue-light and a UV transilluminator.

Recommended model: configuring the LUV-260 series UV transilluminator

The LUV-260 series featured on this site is configured along the logic above: 8 × 8W UV tubes, a 26×21 cm illuminated area, special UV filter glass, and wavelengths available as single or dual combinations of 254 nm, 302 nm, and 365 nm - six combinations in all - to match the dye system and excision needs. The housing has fan cooling so the surface does not overheat during long sessions; the shield is offered in fixed and adjustable versions, and the adjustable version can be lowered during excision to keep both the field of view and hand protection.

Selection advice: for routine viewing and recording choose single-wavelength 302 nm; if excision and recovery are also involved choose the 302 nm + 365 nm dual version, so you can view, then excise, and switch at any time; for teaching or shortwave observation consider 254 nm. Models, surface dimensions, and pricing are on the LUV-260 series UV transilluminator page.

Common questions

What should I do if the bands look very dim?

Turn off the lights and close the blinds to confirm it is an ambient light problem, then check whether the tubes are aging (brightness falls noticeably at end of tube life) and whether the filter glass carries fingerprints or residual gel.

Should I wear a face shield when cutting out bands?

Yes. A UV transilluminator is an open surface, and both 302 nm and 254 nm are hazardous to eyes and skin, so a shield, face mask, and gloves are basic equipment; 365 nm is gentler but should still not be viewed directly.

Can a gel transilluminator be used for direct photography?

Yes. A phone with a UV filter or a dedicated gel documentation system can both record the gel; watch the exposure time and the evenness of surface brightness, and calibrate with a marker from the same batch when needed.

How do I clean a dirty surface?

Switch off the power and wipe the filter glass with anhydrous ethanol; avoid abrasive cleaners, because scratches scatter UV light and reduce contrast.

Does switching wavelengths on a dual model change brightness?

Switching changes nothing but which tube group is lit, and with a normal design the brightness difference is small; but 365 nm has lower fluorescence efficiency than 302 nm, so ambient illuminance should be reduced somewhat when reading.

For more models and specifications of UV transilluminators, UV gel cutters, and gel transilluminators, see the UV transilluminator section.

Related sections and models

This article belongs to the Frequently asked questions section.

Other sections on the same product line include UV transilluminators (excitation transmitted upward through gels and thin-layer plates, so bands can be read without turning the plate over) and Life science instruments (the entry point for fluorescence imaging, UV crosslinking, UV transmission, and cell irradiation).

Models mentioned in this article: LUV-450, XEPU-1126, LUV-260. Ranges, accuracy, and accessory lists for each model are listed on the product pages.

  • Official WeChat QR code

    Email: info@xinysun.com

  • Tel: 131-2093-6518

  • Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai

Official WeChat QR code Follow

Official WeChat QR code

Contact

131-2093-6518

Top