Xinysun Instrument (Shanghai) Co., Ltd.

Applications

Breadcrumb: Home > Applications > Lab Research

LUYOR-3415RG Dual-Wavelength Excitation Light Source Application Cases: Six Fluorescence Observation Scenarios

Updated:2026-11-02Views:

Fluorescent proteins are not seen, they are excited. A GFP seedling looks no different from an ordinary seedling under normal light; the green signal appears only when the right wavelength is used and viewed through matching filter glasses. This article follows six scenarios in which LUYOR-3415RG - dual wavelength, 0.9 kg handheld - is used: non-destructive screening in sealed culture jars, seed and plate sorting, live observation in the field, photographic documentation, animal models and colony screening. It also covers how the wavelength pair is chosen, which accessories decide the result, and where the tool stops and the microscope takes over.

Fluorescent proteins are not "seen", they are "excited". A GFP seedling is indistinguishable from an ordinary seedling under normal light; only when light of the right wavelength falls on it and the eye looks through the right filter glasses does the green fluorescence come up. Whether transgenic screening and fluorescence observation work therefore depends first on the light source being correct and powerful enough. LUYOR-3415RG was built for this: two excitation wavelengths in a handheld device of 0.9 kg. The six scenarios below show how it is used on site and what it solves.

Why fluorescence observation starts with the light source

A fluorescent protein works like this: excitation light in a specific band lifts its electrons, which then release the energy at a longer wavelength. The signal is weak, and the excitation light has to be filtered out by viewing glasses so that only the fluorescence reaches the eye. The practical consequence is that observation stands or falls on whether the excitation power is sufficient and whether the filters match.

The traditional route is the fluorescence microscope. It is precise, but three constraints cannot be avoided on site: the field of view is small, material must be sampled or carried into the lab, and the instrument cannot go to the field or the greenhouse. A high-power handheld excitation source takes another route: in place, live, non-destructive - no tissue is taken and no plant is damaged, because illumination happens where the material stands. The two routes are not substitutes but a division of labor: the microscope for high-resolution imaging and quantification, the excitation source for rapid prescreening, large-scale screening, and live or field observation.

What sets LUYOR-3415RG apart is the number of wavelengths. The standard configuration pairs RB royal blue (440-460 nm, with a 500 nm filter) for GFP, eGFP and fluorescein with GR green (510-540 nm, with a 600 nm filter) for DsRed, tdTomato and mCherry. One device covers the two common groups of fluorescent proteins, and two switches on the lamp body change between them, so there is no lamp to swap and no second torch to carry.

Scenario 1: non-destructive screening inside sealed culture jars

The problem: culture plantlets grow in sealed jars, and the usual practice is to take the plantlet out or open the jar to look at it. Opening the jar brings contamination risk, and in the worst case the whole jar is lost - a heavy price to pay for one round of screening.

On site: do not open the jar. Aim the source at the wall and look through the wall and the medium for green fluorescence in the plantlets inside, wearing LUV-30A viewing glasses to filter the excitation light. Material that fluoresces is a positive transformant and stays in the jar to grow on; material without fluorescence is handled as required.

What it solves: screening and maintenance happen at the same time - positives are picked out without letting the plantlets meet the outside air. For a culture laboratory this saves not only handling time but the contamination risk to the whole batch.

Key point: the jar wall and the medium attenuate the excitation light, so this application asks more of the power than direct illumination does. The 12 LEDs and 27 W total across the two bands exist so that viewing "one layer away" stays clear.

Scenario 2: seed sorting and large batch plate screening

The problem: sorting transgenic seed of rice, Arabidopsis and similar material means confirming red or green fluorescence seed by seed under a microscope. A project with several hundred or several thousand seeds, all passed one at a time under the microscope, is a workload that is simply not practical.

On site: mount the source on an adjustable stand and set it about 150 mm from the material. At that distance the illuminated diameter is about 180 mm, enough to cover a cluster of seeds, a whole Petri dish or a whole seedling in one pass. Both hands are free to look and sort at the same time. When one batch carries two markers, switch bands with the switch on the lamp body and no realignment is needed.

What it solves: "one seed at a time" becomes "one batch at a time". A user sorting rice seed carrying a red fluorescent marker reported strong emission and clear observation, which made sorting more accurate; with the stand, both hands are free and a large manual sorting workload becomes manageable. The built-in rechargeable battery pack allows long uninterrupted runs.

Scenario 3: live observation in the field and the greenhouse

The problem: the textbook procedure is to sample, carry the sample back to the lab and put it under a microscope. For field material, sampling means destroying the plant; and a fluorescence microscope cannot be carried into a field, nor can a greenhouse provide one per seedling.

On site: the unit weighs 0.9 kg and comes with an aluminum carry case and a rechargeable battery pack, so it goes straight to the field, the greenhouse or the culture room. Hold it to illuminate a living plant and observe through the matching glasses. Under bright outdoor light, pull the supplied shading cloth over the area to bring the ambient level down first.

What it solves: no tissue is collected and no living plant is damaged, so the same plant can be observed repeatedly and tracked over time. Users have reported that a portable source solves the narrow field of view that limits microscope photography, and that it suits field photography of transgenic fluorescent plants in particular.

An observation point that is easily missed: red fluorescent proteins (RFP, mCherry and similar) are often constrained by filter cube configuration under a microscope, whereas under a high-power dedicated handheld source the visual result is quite good. If a project relies mainly on red markers, this type of source is worth considering first.

Scenario 4: photographic records and figures for papers

The problem: positive material that has been picked out needs an image record for the lab notebook and for figures in a paper. Visual observation with a handheld device works well, but a casual phone snapshot is often not enough for a publishable image.

On site: add a LUV series photographic filter; the 67 mm size mounts directly on an SLR lens, and other sizes need an adapter ring. Phone users can use a phone photographic filter. During shooting, control the ambient light with a shading cloth so that the fluorescence in the frame is clean enough.

What it solves: users have reported a marked improvement in image quality after adding a plant photography filter, sufficient for figures in higher-level journals. Note that the filter size must match the lens, so confirm the lens thread before ordering to avoid a filter that will not fit on arrival.

Scenario 5: cutting molecular work from "everything" to "positives only"

The problem: the safe approach when screening transgenic material is to run a molecular assay (a western blot, for example) on every candidate. Most candidates are in fact negative, and spending the same effort on them consumes labor quickly.

On site: place the excitation source ahead of the workflow as the prescreen. Illuminate all candidates first and pick out the plants with a clear fluorescence signal; molecular work is then run on those positives only.

What it solves: the downstream workload drops noticeably. One user noted that every GFP or RFP line used to need a western blot for confirmation, and that illuminating first and testing only the positives has raised efficiency considerably.

One point to state clearly: fluorescence prescreening is a way to narrow the field quickly; it is not a conclusion in itself. Used as the step before molecular identification, it sits in the right place - the prescreen picks the material, and the molecular assay settles the answer.

Scenario 6: animal models and microbial colony screening

The problem: fluorescent markers are not used only on plants. Observing fluorescent protein expression in model animals such as zebrafish and nematodes, and screening GFP/RFP-marked colonies, also relies on large numbers of visual judgements, and the repetitive work is just as heavy.

On site: the same as plant screening - illuminate, observe through the matching glasses, and photograph with a filter where needed. With the dual-wavelength version, GFP and RFP markers on the same sample can be compared directly by switching bands, which removes the step of changing light sources.

What it solves: work that required taking each sample to an instrument becomes a screening routine carried out beside the incubator or at the bench. For high-count work such as colony screening the difference in efficiency is especially clear.

One lamp for two groups of fluorescent proteins: choosing the pair

The selection logic for LUYOR-3415 is "any two of five sources". The standard RG configuration is R plus G. The table below sets out how the five sources correspond, so that a project can be matched to one:

Source codeExcitationFilterObservable fluorescence / typical use
R (royal blue)440-460 nm500 nmGFP green fluorescent protein, eGFP, fluorescein
C490-515 nm550 nmYFP yellow fluorescent protein, Venus, lucifer yellow
G (green)510-540 nm600 nmDsRed red fluorescent protein, tdTomato, mCherry
V (violet)400-415 nm460 nmCFP cyan fluorescent protein, BFP
U (ultraviolet)360-380 nm415 nmDAPI blue fluorescence, Hoechst

Three combinations cover most cases: for routine transgenic screening, choose R + G (the standard LUYOR-3415RG configuration), which covers GFP and the DsRed/mCherry group; to distinguish two blue-green markers at the same time, choose R + V; for nuclear localization together with expression observation, choose U + R.

One thing to confirm before ordering: the two bands are fixed at the factory and cannot be changed on site. List every fluorescent protein the project involves before ordering and choose the pair from that list. This differs from buying a single-wavelength model and needs to be planned ahead. If you are unsure which pair to take, send us the list of fluorescent proteins and we can help judge the coverage.

Before a session of fluorescence observation on site

  • Source combination: confirm that the band matches the fluorescent protein to be observed; this is the precondition;

  • Viewing glasses: LUV-30A (for GFP) and LUV-50A (for RFP) are supplied as standard. For GFP in green tissue, consider adding LUV-30AG, which helps exclude interference from red chlorophyll fluorescence;

  • Ambient light: ordinary indoor lighting is enough to see fluorescence; use the shading cloth outdoors or under strong light;

  • Working distance: at 150 mm from the lamp the illuminated diameter is about 180 mm, a distance that balances brightness and covered area;

  • Photographic filter: for records, confirm the lens thread (67 mm mounts directly, other sizes need an adapter ring), or use a phone photographic filter;

  • Stand: for field patrols, handheld use is enough; for seed sorting or plate screening with several hours of continuous work, an adjustable stand is recommended.

Frequently asked questions

Dual-wavelength 3415RG or single-wavelength 3280?

It depends on how many fluorescent proteins the project involves. With only one marker, a single-wavelength model is enough, costs less and is simpler to use. With both GFP and DsRed/mCherry markers, take the dual-wavelength 3415RG: one device with two switches saves space and budget compared with two light sources. Single-wavelength models include LUYOR-3280, and comparable products include the NIGHTSEA Xite series.

Can the two bands be changed later?

No. Both bands are fixed at assembly and must be decided at the order stage. If the direction of the project may shift, list every possible observation target before ordering and choose the pair with the wider coverage. This is the point to think through in advance when buying a dual-wavelength device of this kind.

Is a darkroom required?

No. The output is enough to see clear fluorescence under ordinary indoor lighting; outdoors or under strong ambient light, use the supplied shading cloth. For the workflow, removing the darkroom preparation is itself an efficiency gain.

Are the viewing glasses essential?

Yes. They do two things: they filter out the excitation light and pass only the fluorescence, without which the signal would be swamped and could not be resolved at all; and they protect the eyes from looking into a strong excitation beam. Different bands pair with different glasses, so the glasses change when the source combination changes.

Can material be observed through a Petri dish or a culture jar?

Yes, and this is one of its practical values - whether material in a jar carries fluorescence can be judged without opening the jar or lifting the lid. Note that the intervening layer attenuates both the excitation light and the fluorescence, so the distance and brightness may need adjustment; move closer or lower the ambient light if necessary.

Can it replace a fluorescence microscope?

No, the two have different roles. The microscope is suited to high-resolution imaging, subcellular localization and precise quantification; the handheld source is suited to large-scale screening, live observation and field work. In practice they are usually used together: the source picks out positives quickly, and the microscope then examines representative samples in detail.

Related products and further reading

Conclusion

Taken together, the six scenarios come down to one sentence: LUYOR-3415RG frees fluorescence observation from the constraint that material has to be carried to a microscope. The culture jar, the seed tray and the field can all become the observation site, and dual-wavelength switching lets two markers on one plant be compared in sequence. There is one thing to settle before buying - which fluorescent proteins the project involves, because that decides the source combination. Once the combination is fixed it cannot be changed, and the remaining accessories (glasses, stand, filters) can be added item by item according to how hard the device will be used. For advice on a wavelength pair, an accessory list or on-site guidance, please contact us.

Related sections and models

This article belongs to the Research laboratory techniques section.

Other sections on the same product line include GFP fluorescence flashlights (models sorted by GFP/RFP/DsRed band, in handheld and benchtop formats), Semiconductor particle detection (grazing illumination to locate, fluorescence to identify organics and counting for concentration - three complementary methods) and Life science instruments (the entry point for fluorescence imaging, UV crosslinking, UV transmission and cell irradiation).

Models mentioned in this article: LUYOR-3415RG, LUYOR-3280 and LUYOR-3421. Ranges, accuracy and the accessory list for each model are given on its product page.

  • Official WeChat QR code

    Email: info@xinysun.com

  • Tel: 131-2093-6518

  • Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai

Official WeChat QR code Follow

Official WeChat QR code

Contact

131-2093-6518

Top