Xinysun Instrument (Shanghai) Co., Ltd.

Applications

Breadcrumb: Home > Applications > Semiconductor Cleanroom

How to Choose a Surface Inspection Light? Differences Between White, Yellow-Green, and UV Light and a Comparison of Four LUYOR Models

Updated:2026-11-17Views:

A cleanroom bench looks clean until a beam of side light sweeps across it, and then particles, fibers and fingerprints all appear. A surface inspection lamp does not form an image; it uses intense light with a controlled angle and spot to make contamination visible through scattering. Selection comes down to three questions: which wavelength band, which form factor, and whether the lighting technique is right. This article compares four current models - the 3318 benchtop diffusing panel, the 3325G portable lamp, the 3360G zoom flashlight and the 3320 parallel beam unit - and explains what grazing, normal and oblique illumination each reveal, from wafer particles to fingerprints and micro-scratches.

A cleanroom bench looks clean to the eye until a beam of side light sweeps across it, and then particles, fibers and fingerprints all appear - that is how a surface inspection lamp is used. It does not form an image; it throws a beam of intense light with a controlled angle and spot onto the surface so that contamination and defects show up through scattering. Selection comes down to three questions: which wavelength band, which form factor, and whether the technique is right. This article takes them in that order, with common questions at the end.

First, keep it separate from a UV flashlight: the MNT-365A UV flashlight looks for organic residues that fluoresce - oils and cleaning agent residue light up under UV-A - while a surface inspection lamp looks for physical defects that do not fluoresce: particles, scratches, fingerprints and burrs revealed by side light. The two checks are often used together and cannot replace each other.

1. Choosing among three wavelength bands

The point of band selection is to make the contrast between defect and background as large as possible:

BandCharacterWhat it suits
White light (400-760nm)Color rendering close to daylight; both defect and base color are visibleFull visual inspection of machined parts, painting, printing and assembly, where color and overall appearance have to be judged together
Yellow-green (500-600nm)Monochromatic narrow-band output; the eye is sensitive in this region and background interference is lowParticles and micro-scratches on wafers, cover glass, lenses and precision parts; long visual inspection sessions in a cleanroom
Yellow (530-670nm)Free of the blue-violet and UV components that photoresist is sensitive toWork areas for photosensitive materials such as photoresist (yellow rooms)

LUYOR surface inspection lamps cover four working formats: the 3318 offers cool white or warm white with an optional green filter, the 3360G offers yellow-green, white and yellow, the 3325G is a dedicated yellow-green unit, and the 3320 provides green, white or yellow in a parallel beam. When in doubt, yellow-green is the wider compromise - it keeps high contrast without giving up color information the way pure green does.

2. Comparing the four current models

ModelFormatLight source and illuminancePower and weightSuits
LUYOR-3318 seriesBenchtop (diffusing panel)24W; 3318W cool white about 59,000 lux@30cm, 3318Y warm white about 49,000 lux, green filter optionalMains powered; fixed stationBatch appearance inspection at a fixed station: optical parts, machined parts, printed matter
LUYOR-3325GPortable (handheld or on a stand)36W LED, 570-580nm yellow-green, wide and highly uniform output100-240V AC (GD version with lithium battery); 900g, 180×200mmWafer and carrier inspection (fits 1-18 inch), large-area cleanroom sweeps
LUYOR-3360G yellow-green surface inspection lampFlashlight (zoomable)20W; 3360G yellow-green about 280,000 lux@40cm (5cm spot), 3360W white about 130,000 lux, 3360Y yellow about 70,000 lux5000mAh lithium battery, 3-4 hours runtime; 340gNarrow areas, field patrols, re-checking wafers and precision parts; aluminum body wipes clean easily
LUYOR-3320 parallel beam surface inspection lampParallel beam (on a stand)10 LEDs through a linear lens produce a parallel beam, 8 degrees vertical / 60 degrees horizontal; green 530nm about 45,000 lux@30cm, white 400-760nm about 51,000 lux100-260V AC or built-in 24V lithium battery; 1kg, 270×72×65mmMicro-scratches, Mura, dust and coating uniformity; a 30×1.5cm bar of light for scanning, several units can be linked

In one line: the 3318 is a station lamp, the 3325G is a sweep lamp, the 3360G is a flashlight and the 3320 is a parallel-beam scanning lamp. The diffusing panel of the 3318 spreads light over a whole area, which suits laying the sample out and looking carefully; the zoom spot of the 3360G (5 / 10 / 50cm at 40cm) can be narrowed to find particles and widened to survey an area; the 3325G sits between them, with wide output for inspecting a whole wafer; the 3320 takes the parallel-beam route, with light skimming the surface at 8 degrees so that scattering from micro-scratches is easier to see, at the cost of an illuminated area that is only a 30×1.5cm strip, so scanning along a line is required.

3. Technique matters more than the lamp: grazing, normal and oblique

With the same lamp, different techniques reveal completely different defects. The table below is organized by defect type:

Defect typeTechniqueWhy it becomes visible
Particles, dust, lintParallel-beam grazing: the body almost touches the surface and is swept along a direction close to 180 degreesLight is refracted and scattered by the particle into the eye, so the particle becomes a bright point against a dark background
Fingerprints, water marks, oil filmNormal illumination: the optical axis close to 90 degrees to the surfaceThe contamination layer has a different reflectance from the substrate, so reflected light returns as a bright patch or a hazy area
Scratches, pits, bubblesView normally first, then re-check with the lamp at a 10-30 degree oblique angleScattering at the scratch edge is stronger away from the specular direction, so a sweep at an oblique angle makes it light up

Field experience compresses to a short rule: grazing for particles, normal for fingerprints, oblique for scratches. Reaching a conclusion after a single sweep at one angle is a common cause of missed defects. For a more detailed breakdown of technique, see surface cleanliness inspection before coating and particle inspection on the inner walls of wafer carriers.

4. Quick reference by application

ApplicationTechniquePoints to watch
Particles on wafer surfacesGrazing sweep plus small-spot re-checkAdhered dust and lint; rule out scratches before calling a particle
Wafer masks and photomasksView the pattern area normally, then re-check at 15-30 degreesPinholes, missing corners, particles, hazy contamination
LCD panels, cover glass, lensesNormal for fingerprints and water marks, oblique for scratchesRegular reflections from the coating and AF layer are normal; judge a defect by whether it is isolated and irregular
Metal parts and machined surfacesGrazing for particles and burrs, normal for scratchesPolished surfaces reflect strongly, so keep the spot small
Paint and coating surfacesOblique sweepOrange peel, particles, sags, pinholes
Routine cleanroom patrolSwitch technique by surface type, grazing before normalTool surfaces, walls, pass boxes; pair with the MNT-365A for a fluorescent residue check

Particle inspection in the semiconductor industry is where this method is applied in most depth; for the choice of method and a re-check SOP, read the semiconductor particle detection topic and cleanroom tool maintenance patrol applications.

5. Frequently asked questions

What is the difference between a surface inspection lamp and a UV flashlight?

A UV flashlight illuminates organic residue that fluoresces (oils, fibers, cleaning agent residue) and depends on UV-A excitation; a surface inspection lamp illuminates physical defects that do not fluoresce (particles, scratches, fingerprints, burrs) and depends on side-light scattering. Cleanroom inspection usually sweeps for fluorescent residue with UV first, then checks physical defects with a surface inspection lamp; the two are complementary.

Why is yellow-green better than white for cleanroom inspection?

Two reasons. First, under a monochromatic narrow band (500-600nm) there is less background interference, so the contrast between particle and substrate is cleaner; second, the eye is sensitive in the yellow-green region, so the subjective brightness is higher at the same illuminance and long visual inspection sessions are less tiring. The advantage of white light is complete color information, which suits work where defects and color or overall appearance have to be judged together.

How do I choose between the LUYOR-3318, 3325G and 3360G?

Choose by working format: for a fixed station where samples are laid out and studied, take the 3318 benchtop diffused lamp; for whole-wafer or large-area sweeping, take the 3325G portable lamp; for narrow areas, field patrols and zoomed re-checks, take the 3360G flashlight. Their band coverage differs, and they can also be configured as a set.

How small a particle can a surface inspection lamp reveal?

There is no single answer; it depends on illuminance, viewing distance, the contrast characteristics of particle against substrate, and the ambient light level. In practice, grazing illumination with a dark background is the precondition for small particles to appear; when validating capability, confirm on site with a reference block or a known sample, which is more reliable than reading a specification table.

How dark does the room need to be during inspection?

Side-light methods depend on contrast against a dark background; the stronger the ambient light, the more easily a weak scattering signal is swamped. For cleanroom visual inspection, turn off or shield ambient light and let the observer adapt for a few minutes before judging; keeping the lighting conditions fixed for a given inspection item is what makes the criterion stable.

How long does the lamp last, and when should it be replaced?

The LED life of the 3325G is rated above 50,000 hours, and for the 3360G and 3318 illuminance decay is likewise the practical criterion: replace the unit when illuminance falls to the point of affecting defect judgment, or when it is visibly dimmer than a new unit of the same model. Keep the lens clean day to day, because dust and fingerprints noticeably reduce effective output.

6. Related products and further reading

If what you need to find is micro-scratches and dust on a flat reflective surface - a polished wafer face, cover glass, a coated part, a ground surface - the LUYOR-3320 parallel beam surface inspection lamp is the usual starting point: 10 LEDs through a linear lens produce a parallel band of light, grazing at 8 degrees vertical, 45000 lux green at 30cm, with the beam not aimed into the eye. It can be mounted on a stand for continuous scanning at a fixed station, or several units can be linked to cover a large workpiece.

Closing notes

A surface inspection lamp is an instrument that forces defects out with light: the band sets the contrast ceiling, the form factor sets the working situation, and the technique decides what you can see. The three LUYOR models cover station, sweep and handheld formats, and on the band side white, yellow-green and yellow each have a place - once the type of object and the working format are fixed, selection is not difficult. The real skill is in the technique: complete the grazing, normal and oblique steps before drawing a conclusion.

Related sections and models

This article belongs to the frequently asked questions section.

Other sections on the same product line include surface inspection lamps (low-angle side light that pulls particles, scratches and fingerprints out of the background) and industrial test instruments (the entry point for UV inspection, rotational speed measurement, stroboscopic observation and surface inspection).

Models mentioned in this article: LUYOR-3318, LUYOR-3325G, LUYOR-3360G. Ranges, accuracy and accessory lists for each model are listed on the product page.

  • Official WeChat QR code

    Email: info@xinysun.com

  • Tel: 131-2093-6518

  • Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai

Official WeChat QR code Follow

Official WeChat QR code

Contact

131-2093-6518

Top