Breadcrumb: Home > Products > Industrial Test Instruments > Stroboscopes

Overview
LUYOR-906 is a handheld 40-LED stroboscope covering 60-300,000 rpm with five trigger modes and external trigger tracking for printing and machinery checks.
The LUYOR-906 handheld LED stroboscope is a new-generation portable stroboscope developed by LUYOR. Its core is a 40-emitter imported LED array: with a high-performance processing unit and an efficient energy-conversion chip, flash accuracy is high, output is stable, and the body runs cool, while the array layout gives bright, even light. Point it at a running machine and tune the flash rate to match the motion; a high-speed rotor, printing plate, or moving web appears to stop in front of you. That is stroboscopic observation.
It answers two field problems. Seeing: observe the true state of rotating, reciprocating, and web-handling mechanisms without stopping the line (cracks, looseness, loss of synchronism, print registration). Measuring: read speed directly (60-300,000 flashes/min) and skip the reflective tape and tachometer steps. A color LCD and an imported encoder knob make frequency setting fast and readings easy to read; frequency and parameters are retained, so the next power-up is ready to use.
Positioning in one line: the LUYOR-906 is the white-light general-purpose model in the 906 family, covering motion observation and speed measurement in printing, paper, textiles, electric motors, and general machinery with one instrument. If your focus is automatic tracking of printed patterns, choose LUYOR-906L; for 850nm infrared, choose LUYOR-906IR; for anti-counterfeit inspection, choose LUYOR-906UV.
40 imported LEDs in an array give an even spot and long reach; high-power LEDs with an efficient supply module balance brightness and reliability.
An imported encoder and streamlined software take the knob straight to the target frequency, much faster than stepping through keys, which keeps field work fluid.
Internal memory keeps the flash frequency and internal parameters, so the next power-up needs no reset and rotating between units is easier.
In external trigger mode, photoelectric, Hall, proximity, encoder, or gear signals make the flash follow the workpiece, so the pattern stops drifting.
Flash duration is adjustable from 8 to 100 μs, so brightness can be matched to material and viewing distance for clarity and comfort.
An efficient energy-conversion chip keeps the body cool, and the high-performance lithium battery suits long inspection rounds.
| Item | Specification |
|---|---|
| Product model | LUYOR-906 (LED handheld stroboscope) |
| Light source | 40-emitter imported LED array (white light) |
| Flash range | 60-300,000 flashes/min (rpm / Hz switchable) |
| Flash accuracy | ±0.001% ±1 digit |
| Display | LCD |
| Trigger modes | Internal trigger, single pulse, circumference scaling, encoder, gear (five) |
| Brightness adjustment | Flash duration 8-100 μs, adjustable |
| External trigger input | Photoelectric switch / Hall switch / proximity switch / encoder / gear sensor |
| External trigger signal | Low level 0-0.7V, high level above 2.8V (5V maximum), rising-edge trigger, high level over 20 μs |
| External trigger supply | DC5V 50mA (provided by the stroboscope) |
| Scroll function | Image moves forward and backward in external trigger mode |
| Power | DC8.4V 3500mAh lithium battery |
| Dimensions | 160 mm × 130 mm × 230 mm |
| Weight | About 1040 g |
| Protection rating | IP54 |
The data above comes from the LUYOR-906 product page and manual. If the documentation shipped with the unit has been revised, that version governs.
The 906 series shares one handheld platform (about 1 kg, 160×130×210 mm, 60-300,000 flashes/min); the differences are the light source and the supporting capability. Choose by what you need to inspect:
| Model | Light source | Main use | Distinguishing capability |
|---|---|---|---|
| LUYOR-906 | White light, 40 LEDs | General motion observation and speed measurement | Five trigger modes, external trigger tracking |
| LUYOR-906L | White light, 40 LEDs | Automatic tracking of printed patterns | Built-in laser sensor identifies and tracks the pattern |
| LUYOR-906IR | 850nm infrared, 40 LEDs | Stop-motion / low-light inspection | Optional laser module, stroboscope and tachometer in one, IP54 |
| LUYOR-906UV | 365-375nm UV, 40 LEDs | UV anti-counterfeit inspection | Anti-counterfeit ink visualization and high-speed positioning |
If you are unsure which model fits, tell us what you are observing (material, printed pattern or not, ambient light level, whether speed must be measured) and we will help match it.
Check print registration, transfer action, and ink-bar defects; an encoder on the external trigger tracks the pattern automatically, so multi-color registration is visible in one view.
Detect paper defects, broken picks, fabric surface faults, and web oscillation from tension; web speed reads directly.
Freeze rotors, impellers, and gears to inspect balance marks, cracks, and loose bolts; field inspection of large generators and rotating machinery.
Judge imbalance, misalignment, and loose components without stopping the machine; read speed directly instead of applying tape.
Check belt tension, chain wear and elongation, and synchronism across a multi-shaft drive, catching faults early.
Capture fluid and airflow patterns, observe material fatigue, and demonstrate circular motion and simple harmonic motion.
Estimate speed from experience or the nameplate, set the flash frequency close to it, then fine-tune until the image is fully still; the reading at that point is the actual speed.
Strong ambient light weakens the frozen image; lower background lighting or move closer, and shorten the flash duration when more sharpness is needed.
Use internal trigger for handheld observation. When the machine provides an encoder or gear signal, use external trigger for a steadier image and longer monitoring.
For external trigger, use a photoelectric, Hall, or proximity switch and observe the signal level (high above 2.8V, 5V maximum) and the rising-edge requirement; take the DC5V supply from the stroboscope.
Charge fully before a shift and use the automatic memory to keep frequently used frequencies and parameters ready for the next power-up.
The flash range is 60-300,000 flashes/min, which covers most industrial rotating equipment. When the flash matches the speed, the image is still and the reading is the speed; units switch between rpm and Hz.
A stroboscope gives a full still image: it shows the speed and gives a direct view of cracks, looseness, loss of synchronism, and pattern defects during operation, which a spot-reading tachometer cannot show. Where an exact spot speed reading is needed, the two can be used together.
Connect a photoelectric, Hall, proximity, encoder, or gear sensor to the external trigger jack; the stroboscope supplies DC5V 50mA. With a low level of 0-0.7V, a high level above 2.8V (5V maximum), rising-edge trigger, and a high level longer than 20 μs, the flash follows the workpiece automatically.
Shorter duration concentrates each flash and sharpens the freeze of fast motion, at some cost in visual brightness; longer duration raises brightness. Work between 8 and 100 μs according to viewing distance and speed.
The LED source has a long life and contains no mercury; under normal use the emitters do not need replacement, and the body stays cool and stable through long continuous flashing.
They share the handheld platform: the 906 is the white-light general model; the 906L adds a built-in laser sensor to white light for automatic tracking of printed patterns; the 906IR is 850nm infrared for low-light work and stop-motion, with an optional laser for speed measurement; the 906UV is 365-375nm UV for anti-counterfeit inspection.
LUYOR-906 manual and specification sheet (PDF)
External trigger wiring diagram and sensor selection notes
906 series comparison table
Xinysun Instruments (Shanghai) supplies the full LUYOR stroboscope range and UV/infrared inspection equipment. We can help select a model for what you observe, specify external trigger sensors, confirm signal levels and wiring, and arrange an on-site demonstration. Send us the equipment type, speed range, and observation requirement.
Send inquiry
Email: info@xinysun.com
Tel: 131-2093-6518
Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai
Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447
