Breadcrumb: Home > Products > Industrial Test Instruments > Stroboscopes

Overview
Handheld 850nm NIR stroboscope: 40 IR LEDs, detachable laser tachometer module, IP54 body, TTL trigger, 9.5 hour runtime, for stop-motion work.
LUYOR-906IR 850nm infrared stroboscope is a handheld near-infrared (NIR) LED stroboscope built around an array of 40 x 850nm infrared LEDs. Its main work is stop-motion inspection, and stop-motion photography and filming: infrared light does not interfere with visible-light filming and produces no glare, yet it stops motion dead. The compact ergonomic body also accepts a detachable laser module with an integrated optical sensor, which turns it into a full-function laser tachometer - a stroboscope and a tachometer in one instrument.
Why infrared rather than white light? The 850nm NIR wavelength is longer and penetrates better, passing through cloth, plastic, semiconductor material, glass, and paper. Its response to metals and to coatings or thin films also differs from white light, which can bring defects forward. Add low power draw (about 9.5 hours per charge), silent operation, cool running, and no lamp replacement, and infrared strobing is a strong fit for low-light and vision-system work.
In one line: choose the LUYOR-906 for general white-light observation; choose the LUYOR-906L for automatic print tracking; choose the LUYOR-906UV for anti-counterfeit inspection; for infrared work in low light or stop-motion, choose this 906IR.
850nm is invisible, so it does not disturb filming, photography, or visual observation, and it cuts the glare and reflection typical of white lighting.
The longer NIR wavelength passes through cloth, plastic, semiconductor material, glass, and paper, revealing motion and structure below the surface.
Contrast rises or falls with object color, so white, dark, and gray detail separate more clearly; the different response of metals and coatings brings defects forward.
LED efficiency gives about 9.5 hours of runtime, with silent operation, cool running, and no emitter replacement.
Flash rate reaches 299,999 FPM, so even fast motion can be held steady.
With the detachable laser module and optical sensor fitted, the unit is a full-function laser tachometer.
| Item | Specification |
|---|---|
| Product model | LUYOR-906IR (850nm infrared stroboscope) |
| Light source | Infrared 850nm, 40-emitter LED array |
| Flash range | 60-300,000 FPM (FPM / RPM) |
| Display | 6-digit LCD, high-contrast white on black, backlit |
| Resolution | 6 digits, to 0.1 |
| Tachometer mode | 60-299,999 RPM (integrated laser or external input) |
| External trigger | TTL input (12Vdc maximum); 3.3Vdc TTL output provided |
| Continuous runtime | About 9.5 hours (typical) |
| Power | Rechargeable lithium-ion pack 8.4V 3500 mAh; charger 100-240V 50/60Hz |
| Housing / protection | Splash and dust resistant, IP54 |
| Tripod | 1/4 in × 20 |
| Dimensions | 160 mm × 130 mm × 230 mm |
| Weight | About 1040 g |
| Supplied accessories | Stroboscope, charger, carry case, certificate, warranty card, manual |
The data in the table comes from the official LUYOR-906IR product page; where shipped documentation differs, the shipped documentation prevails.
Motion checks and process validation on stop-motion lines, where infrared light does not disturb the ambient lighting or the camera.
Animation studios shoot frame by frame and use infrared strobing to watch motion rhythm and mechanical action without visible flash affecting the lighting setup.
Machine vision in low light or dark-field inspection: infrared illumination produces no visible glare, so image signal-to-noise is better.
See motion and structure inside cloth, plastic, film, glass, and paper, and find defects below the surface layer.
Infrared responds differently to metals and to coatings or films, bringing out scratches, bubbles, uneven areas, and interface defects.
With the laser module fitted the unit measures speed (60-299,999 RPM), so strobing and tachometry are done with one instrument.
850nm is near-infrared and is essentially invisible to the eye. It also does not disturb visible-light filming or visual observation the way a white flash does, which is the core advantage in stop-motion and vision systems.
Yes. With the detachable laser module and integrated optical sensor fitted, it is a full-function laser tachometer with a 60-299,999 RPM range, so the stroboscope and the tachometer are one instrument.
IP54 means splash and dust resistance, which suits industrial sites with some dust and spray better than a conventional IP30 unit. It remains a handheld instrument, so direct rain and immersion should be avoided.
The unit provides a TTL-compatible input (12Vdc maximum) and a 3.3Vdc TTL output, which makes trigger synchronization and signal cascading straightforward with vision systems, PLCs, or controllers.
The rechargeable lithium-ion pack is about 21Wh and gives a typical runtime of about 9.5 hours per charge. The 100-240V wide-range charger works on both 110V and 230V supplies.
The LUYOR-906IR is the infrared version of the 906 platform. It shares the roughly 1 kg handheld body with the 906 (white light), the 906L (white light with laser tracking), and the 906UV (365-375nm UV for anti-counterfeit work), and is distinguished by light source and application.
LUYOR-906IR manual and technical specification sheet (PDF)
Laser module (tachometer) fitting instructions
TTL trigger interface notes for vision system integration
Xinysun Instruments (Shanghai) supplies the full LUYOR stroboscope range. We help confirm whether an infrared approach suits your samples, fit the laser tachometer module, integrate the trigger with vision or control systems, and arrange an on-site demonstration.
Send inquiry
Email: info@xinysun.com
Tel: 131-2093-6518
Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai
Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447
