Xinysun Instrument (Shanghai) Co., Ltd.

Products

PRODUCTS

Breadcrumb: Home > Products > Industrial Test Instruments > UV Flashlights

LUYOR-3101H Helmet-Mounted LED UV Inspection Lamp
  • LUYOR-3101H Helmet-Mounted LED UV Inspection Lamp

LUYOR-3101H Helmet-Mounted LED UV Inspection Lamp

Overview

LUYOR-3101H head-mounted UV inspection lamp uses three 365 nm LEDs for 8000 uW/cm2 at 38 cm and a 150 mm spot, hands-free for penetrant and MPI scanning.

Model:LUYOR-3101H
Updated:2026-11-16
Manufacturer:LUYOR
Reference price:¥7,900
Datasheet:Download datasheet
Views:
DetailsSend inquiry
3 × 365 nm LEDspure longwave - no UVB/UVC - wide spot
8,000 μW/cm²center intensity at 38 cm - meets inspection standards
150 mm spot diametereffective coverage at 38 cm - fast scanning
50,000 hour lifeLED source - low maintenance cost
Battery, 500 cycleslithium pack - 500 charge cycles
Head-mounted or handheldadjustable handle - tiltable beam angle

Product overview: a wide-spot head lamp that scans large areas without strain

The LUYOR-3101H head-mounted LED UV inspection lamp builds three 365nm UV LEDs into a wide-spot UV head lamp with a center intensity of about 8,000 μW/cm² at 38 cm and an effective spot diameter of about 150 mm - a wider reach than a focusing head lamp, which suits continuous scanning of tanks, cabins, and large flat welds. The source is pure longwave, with no shortwave UVB or UVC.

It mounts on a helmet for hands-free work, or takes the supplied handle to serve as a handheld lamp, and the beam angle can be adjusted, so it adapts to the site. LED life is 50,000 hours or more, the matching lithium pack takes 500 charge cycles, and a 220V/50Hz charger supports that cycle. The standard kit includes UV safety glasses and a carry case, so work can start on arrival.

Positioning in one sentence: the 3101H is the "wide, long-running, steady" head-mounted scanning lamp. For fine spot checks with a lighter, more focused beam, see the LUYOR-3101S in the same series; for handheld large-area illumination, see the LUYOR-365L and the 3104D/3105D series.

Why the 3101H: scanning efficiency from a wide spot

Wide spot, faster scanningThe effective spot at 38cm is about 150mm across, covering more area than a focusing head lamp, so continuous scanning of large welds and bulkheads takes less effort.
Head-mounted or handheldAn adjustable handle is standard: take the lamp off the helmet when needed and use it handheld, so one unit covers both working postures.
Adjustable beam angleThe head angle adjusts on site to suit pipes, corners, and sloped surfaces that are not flat.
Pure 365nm, no shortwaveNo UVB or UVC, which is easier on the operator and avoids shortwave effects on the surface of some parts.
Instant startThe LEDs need no warm-up and reach rated intensity at switch-on, with no wait for a mercury lamp to stabilize.
Long life, low maintenanceThe source runs 50,000 hours or more and the battery takes 500 cycles, so the cost of ownership sits below older designs that need frequent tube changes.

Technical specifications

ItemLUYOR-3101H specification
Light source type3 × 365nm UV LEDs (pure longwave, no UVB/UVC)
Center wavelength365 nm (band 360-370 nm)
UV intensityAbout 8,000 μW/cm² center at 38cm
Irradiation areaEffective spot diameter about 150 mm at 38cm
Source life50,000 hours or more
Operating currentAbout 700 mA
Battery voltage / power4V / 9W
Battery typeLithium, 500 charge cycles
Charger220V / 50Hz
MountingHead-mounted hands-free / handheld, adjustable angle
Standard kitLamp body, adjustable handle, charger, UV safety glasses, carry case

Figures are compiled from published manufacturer data. Actual intensity varies with battery charge, lens cleanliness, and measuring position; use a site measurement for acceptance.

Typical applications

Fluorescent penetrant inspection

Surface-breaking defect detection on aircraft, automotive, and pressure equipment; the wide spot suits fast scanning of large flat areas.

Fluorescent magnetic particle inspection

Surface and near-surface defect checks on in-service equipment, welds, and shaft parts; hands-free use makes it easier to work and record at the same time.

Contamination checks

Fluorescent contamination surveys on electronic components, circuit boards, and LCD panels, and pre-entry contamination checks for cleanrooms.

Oil and refrigerant leaks

After applying a fluorescent tracer, trace leaks along lines, fittings, and heat exchangers; hands-free use lets you get close to the surface.

Forensic trace development

Fluorescent viewing of fingerprints, blood traces, and similar evidence; the wide spot covers an area in one pass.

Food degreasing verification

Degreasing verification for kitchen utensils, cookware, and tableware, judging cleanliness by fluorescent residue.

How to use it

1
Mount it or fit the handle

For head mounting, fix the lamp body at the center front of the helmet; for close inspection, fit the handle and use it handheld, with the beam angle set beforehand.

2
Dark-adapt before reading

On entering the dark area, let the eyes adapt for a few minutes; fluorescence signals are read reliably after full dark adaptation.

3
Keep the lens clean

Fingerprints and oil scatter UV and reduce center intensity; wipe the lens with a lint-free cloth before each use.

4
Watch charge and cycles

The lithium pack takes 500 cycles; for long storage, keep it at about half charge and top it up periodically to extend service life.

5
Wear safety glasses

Even with longwave UV, wearing the supplied UV safety glasses is advisable to reduce eye strain under long exposure.

A wide spot brings scanning efficiency, and it also means less energy per unit area than a focusing lamp. For weak fluorescence signals, slow the scan over the same area, or switch to the focusing 3101S for confirmation. Writing lens cleaning, dark adaptation time, and scan speed into the work instruction is more reliable than comparing intensity figures alone.

Frequently asked questions

How do I choose between the 3101H and the 3101S?

Both are head-mounted 365nm UV lamps. The 3101H uses 3 LEDs with a spot of about 150mm and an intensity of about 8,000 μW/cm², a wider field and longer runtime with an optional handle, which suits large-area scanning; the 3101S uses one 5W LED with a spot of about 50mm and an intensity of about 10,000 μW/cm², lighter and more focused, which suits fine spot checks. Choose by how much area you need to see.

Can it be used as a handheld lamp?

Yes. The 3101H comes with an adjustable handle, so it becomes a handheld lamp once off the helmet, and the head angle still adjusts on site; one unit covers both head-mounted and handheld work.

Is there any shortwave UVB / UVC?

No. The source is pure 365nm longwave with no UVB or UVC, which is easier on the operator and avoids shortwave effects on the surface of some parts.

How long does the battery last, and how many cycles does it take?

The matching lithium pack takes about 500 charge cycles; continuous runtime per full charge depends on the site, so measure it in your own use. For long idle periods, keep it at about half charge and top it up periodically, which extends usable battery life noticeably.

Does it need warm-up?

No. The LEDs reach rated intensity at switch-on, with no several-minute stabilization as with a mercury lamp, which suits short and intermittent site checks.

How does it differ from a large-area handheld lamp?

The 3101H is a wide-spot head-mounted or handheld lamp for close, carried scanning; where a larger illuminated area and higher intensity are needed, the LUYOR-365L and 3104D/3105D series on this site fit better. Choose by inspection target and working environment rather than by specifications alone.

Documents and service

Documents available on request

  • LUYOR-3101H technical data sheet and operating instructions

  • Head-mounted lamp selection comparison for fluorescent penetrant and magnetic particle inspection (3101H and 3101S)

  • ASTM E3022 black light practice notes and a site record template

  • Battery and charger specifications, handle, and spare accessory list

Service support

Xinysun Instruments (Shanghai) supplies LUYOR 365nm UV inspection equipment and spares. We can help you choose between the head-mounted 3101H/3101S and a handheld model by inspection target and working environment, confirm that intensity and spot size meet the inspection standard, and turn your site inspection routine into a work instruction. Send us the part material, the inspection standard, and the site conditions.

Send inquiry

Message

  • Product Name:

  • Company:

  • Your Name:

  • Phone:

  • Email:

  • Province / Region:

  • Address:

  • Message:

Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447

SiteMap

Official WeChat QR code

WeChat QR
Official WeChat QR code Follow

Official WeChat QR code

Contact

131-2093-6518

Top