Breadcrumb: Home > Products > Industrial Test Instruments > UV Flashlights



Overview
LUYOR-3101S head-mounted black light uses one 5 W 365 nm LED for 10,000 uW/cm2 at 38 cm and a 50 mm spot, leaving both hands free for penetrant inspection.
The LUYOR-3101S head-mounted black light is a 365nm UV head lamp that fixes to a safety helmet or headband. One 5 W UV LED provides a concentrated longwave beam, which turns fluorescent penetrant inspection, magnetic particle inspection, and leak checks from "one hand on the lamp, one eye on the part" into two-handed work - particularly useful at pipe bores, large component welds, and tank inner walls, where you need to illuminate and probe at the same time.
The source is pure 365nm longwave with no shortwave UVB or UVC, which is easier on the operator's skin and cornea; center intensity at 38 cm is about 10,000 μW/cm² and the spot diameter is about 50 mm, which places it in the focusing inspection class. The unit weighs 200 g without accessories, takes two 18650 lithium cells, and runs about 3.5 hours continuously per full charge.
Positioning in one sentence: the 3101S is the "light, focused, steady" head-mounted inspection lamp. For a wider spot and longer runtime with both hands free, see the LUYOR-3101H in the same series; for handheld large-area illumination, see the LUYOR-365L or the LUYOR-3104D/3105D series.
| Item | LUYOR-3101S specification |
|---|---|
| Light source type | 1 × 5W 365nm UV LED (pure longwave, no UVB/UVC) |
| Center wavelength | 365-370 nm |
| UV intensity | About 10,000 μW/cm² at 38cm |
| Irradiation area | Spot diameter about 50 mm at 38cm |
| Source life | 30,000 hours or more |
| Visible light leakage | Below 2 footcandles (about 22 lux) |
| Power | 2 × 18650 lithium cells, 4,400 mAh |
| Runtime | About 3.5 hours continuously on a full charge |
| Dimensions | About 40 × 38 mm |
| Weight | About 200 g (without accessories) |
| Circuit | All solid state - constant current - mechanical cooling |
| Standard kit | Head-mounted lamp body, charger, tool case, UV safety glasses (orange/yellow) |
Figures are compiled from published manufacturer data. Actual intensity varies with battery charge, lens cleanliness, and measuring position; use a site measurement for acceptance.
Surface-breaking defect detection on aircraft, automotive, and pressure equipment; the head-mounted lamp leaves both hands free to grind, develop, and mark.
Surface and near-surface defect checks on in-service equipment, welds, and shaft parts; output stays stable in strong magnetic fields.
After applying a fluorescent tracer, trace leaks along lines, fittings, and heat exchangers; hands-free use makes close inspection easier.
Fluorescent contamination checks on electronic components, circuit boards, and LCD panels, and contamination screening before personnel enter a clean area.
Fluorescent development of fingerprints, blood traces, and similar evidence, plus fluorescence features of biopolymers and minerals.
Degreasing confirmation for kitchen utensils in food service and catering equipment, judging cleanliness by fluorescent residue.
Fix the lamp body at the center front of the helmet or headband, then press the rear switch, so it is not triggered while carrying.
On entering the dark area, let the eyes adapt for a few minutes; fluorescence signals are visible after full dark adaptation.
Fingerprints and oil scatter UV and reduce center intensity; wipe the lens with a lint-free cloth before each use.
The constant-current driver holds intensity at low voltage, but runtime falls away quickly near the end, so start a long shift with a full charge and a spare set of cells.
Even with longwave UV, wearing the supplied UV safety glasses is advisable to reduce eye strain under long exposure.
Fluorescent inspection reading depends on contrast: a dirty lens, visible light leaking in, and eyes that are not dark-adapted all lead to missed indications. Writing lens cleaning, dark adaptation time, and the wearing of safety glasses into the work instruction is more reliable than chasing higher intensity.
Both are head-mounted 365nm UV lamps. The 3101S uses one 5W LED, with a spot of about 50mm and an intensity of about 10,000 μW/cm², focused and light at 200g; the 3101H uses 3 LEDs, with a spot of about 150mm and an intensity of about 8,000 μW/cm², a wider field, and a longer runtime. For fine spot checks take the 3101S; for large-area scanning take the 3101H.
Yes. The 3101S uses an all-solid-state circuit and works steadily near motors, transformers, and other strong magnetic fields, a practical advantage over older mercury tube lamps, and it suits magnetic particle testing beside in-service equipment.
Not noticeably. The constant-current driver holds UV output steady as battery voltage falls and drops away quickly near the end, so there is no fading near the end of the charge that would cause missed indications - though for long shifts a full charge and a spare set are still advisable.
Visible light leakage from the 3101S is below 2 footcandles (about 22 lux), so background interference is small. With dark adaptation and safety glasses, faint fluorescence is easier to resolve; where ambient light at the site is strong, build a simple light shield or read in a dark area.
Wearing the supplied UV safety glasses is advisable. Although 365nm is longwave and contains no UVB/UVC, long exposure can still cause eye strain, and the standard kit already includes orange and yellow glasses.
The 3101S is a focusing head-mounted inspection lamp for close, detailed viewing; where handheld large-area scanning is needed, the LUYOR-365L and 3104D/3105D series on this site provide a larger illuminated area. Choose by how close you work and how much area you view, rather than by intensity alone.
LUYOR-3101S technical data sheet and operating instructions
Head-mounted lamp selection comparison for fluorescent penetrant and magnetic particle inspection (3101S and 3101H)
ASTM E3022 black light practice notes and a site record template
Battery and charger specifications, spare accessory list
Xinysun Instruments (Shanghai) supplies LUYOR 365nm UV inspection equipment and spares. We can help you choose between the head-mounted 3101S/3101H and a handheld model by inspection target and working environment, confirm that intensity and spot size meet the inspection standard, and turn your site inspection routine into a work instruction. Send us the part material, the inspection standard, and the site conditions.
Send inquiry
Email: info@xinysun.com
Tel: 131-2093-6518
Address: 1525 Minqiang Road, Bldg 26, Songjiang, Shanghai
Copyright 2026 Xinysun Instrument (Shanghai) Co., Ltd. All rights reserved.
ICP:ICP-2026046447
